> Brewing Hardware
Subcategories:
Fittings Ball Valves Tri Clover Fittings
Camlocks Quick Disconnects Compression Fittings
Lock Nuts, Washers & O-Rings Brass Fittings Plastic Fittings
Couplings Bushings
BREWING HARDWARE
Stainless Steel can be prettier than gold to a home brewer and OBK has all of the stainless equipment and parts you need for your brewing system. From making your own brew kettle, to adding a site gauge to an existing kettle to upgrading your hoses to camlocks or quick disconnects, OBK has all of the fittings, connectors and o-rings you will need to make your brew day go smoothly.
Sort By:
The Grainfather All-In-One Brewing System The Grainfather Alembic Dome Still Assembly Stainless Steel RIMS Tube - 1.5" Tri Clover Compatible
Price: $1,099.00
On Sale!: $999.99
Price: $459.00
Price: $109.99
The Grainfather offers a slick look, innovative features, and an easy to use design. It is the perfect brewing hardware for both new and veteran brewers. Turn your Grainfather into a micro-distillery with this product. The Alembic Dome Still Assembly comes with the Alembic Dome and Condenser, along with all needed parts. The large copper dome works with the vapours in your Grainfather RIMS Tube - 1.5" Tri Clover Compatible
Stainless Steel Rotating Racking Arm - 1.5" Tri-Clover Blichmann G2 Linear Flow Valve Stainless Steel Tri-Clover Sight Glass - 1.5" TC x 1.5" TC
Price: $93.49
Price: $87.49
Price: $82.00
Stainless Steel Rotating Racking Arm - 1.5" Tri-Clover Blichmann G2 Linear Flow Valve Stainless Steel Tri-Clover Sight Glass - 1.5" TC x 1.5" TC
Stainless Steel Tri-Clover Ball Valve - 3 Piece 1.5" TC Stainless Steel Tri-Clover Butterfly Valve - Squeeze Trigger 1.5" TC Heating Element Adapter - 1.5" Tri Clover x 1" NPS
Price: $79.99
On Sale!: $74.99
Price: $69.86
Price: $65.99
Stainless Steel Tri-Clover Ball Valve - 3 Piece 1.5" TC Stainless Steel Tri-Clover Butterfly Valve - Squeeze Trigger 1.5" TC Heating Element Adapter - 1.5" Tri Clover x 1" NPS
Stainless Steel Tri-Clover Butterfly Valve - Pull Trigger 1.5" TC Stainless Steel Tri-Clover Ball Valve - 2 Piece 1.5" TC Weldless Mash King Bazooka Kit
Price: $64.99
On Sale!: $60.99
Price: $52.49
Price: $47.99
Stainless Steel Tri-Clover Butterfly Valve - Pull Trigger 1.5" TC Stainless Steel Tri-Clover Ball Valve - 2 Piece 1.5" TC This kit is for use with the Mash King. The kit attaches to the lower port on a Mash King. The total length is 12 1/4". This is for cooler's with a minimum wall thickness of 1/4" and a maximum wall thickness of 5/8".
Anvil Brewing Equipment Kettle Ball Valve Stainless Steel Tri-Clover Spray Ball - Rotating CIP 1.5" TC Stainless Steel Inline Thermometer Assembly (Quick Disconnects)
Price: $43.89
Price: $39.99
Price: $39.99
The Anvil Brewing Kettle Ball Valve is made from 304 stainless steel. It has a unique custom design that has an integrated bulkhead seal ensuring a leak-free and rigid joint. Due to using a standard 1/2" NPT fitting. Stainless Steel Tri-Clover Spray Ball - Rotating CIP All Stainless Steel Build. Used to see your wort temperature when cooling or recirculating. Connects with the included disconnects. Two inch thermometer probe gives a instant reading. Home brewing Supplies
Stainless Steel Tri-Clover Extension Tube 18" Stainless Steel Elbow Shank Assembly 3/16 Bore Stainless Steel Tri-Clover Cross - 1.5" TC
Price: $37.99
Price: $37.99
Price: $37.85
Stainless Steel Tri-Clover Extension Tube 18" Stainless Steel Elbow Shank Assembly 3/16 Bore Stainless Steel Tri-Clover Cross - 1.5" TC
Stainless Steel Inline Thermometer Assembly (Camlocks) Stainless Steel Tri-Clover Sample Valve - 1.5" TC x 1/2" Barb Blichmann Stainless Steel 3 Piece Ball Valve - 1/2" Female NPT
Price: $37.49
Price: $36.49
Price: $36.99
On Sale!: $35.99
All Stainless Steel Build. Used to see your wort temperature when cooling or recirculating. Connects with the included Camlocks. Two inch thermometer probe gives a instant reading. Clean by running our Brewery Wash through it. Stainless Part & Fittings Stainless Steel Tri-Clover Sample Valve - 1.5" TC x 1/2" Barb Blichmann 1/2" NPT Stainless Steel 3 Piece Ball Valve - Constructed from 316 stainless steel, the Blichmann Engineering 1/2" NPT Three Piece Ball Valve also features teflon seals for resisting high temperatures. Brewers Hardware Canada SS Fittings
Stainless Steel 3-Way 1/2" Female NPT Ball Valve (L Type Design) 1.5" TC Pressurized Transfer Fitting Stainless Steel Tri-Clover Spray Ball - Stationary
Price: $39.99
On Sale!: $35.45
Price: $34.99
Price: $34.99
3-Way, 3-Piece, 1/2" Female NPT, 304 Stainless Steel Ball Valve. Three way valves are an excellent way to divert flow from one hose to another using only one valve, rather than multiple. The "L" Type design allows for a simple swing of the handle. OBK The 1.5” TC Pressurized Transfer Fitting is made of 304 Stainless Steel. Its intended use is for pressurized transfer. Since it is 1.5” it is able to be used with any 1.5” TC flange. Due to its integrated design it has a pressure relief valve integrated. Stainless Steel Tri-Clover Spray Ball - Stationary
Weldless Kettle Kit Stainless Steel Temperature Bulkhead - 1/4" Male NPT x 1/4" Compression Stainless Steel Tri-Clover Extension Tube 12"
Price: $34.99
Price: $33.49
Price: $32.99
Weldless Kettle Kit Stainless Steel Temperature Bulkhead - 1/4" Male NPT x 1/4" Compression Stainless Steel Tri-Clover Extension Tube 12"
Stainless Steel Tri-Clover Tee - 1.5" TC Heating Element Fitting - 1.5" Tri Clover x 1" NPS Stainless Steel Tri-Clover Concentric Reducer
Price: $32.99
Price: $27.99
Price: $27.49
Stainless Steel Tri-Clover Tee - 1.5" TC x 1.5" TC x 1.5" TC Heating Element Fitting - 1.5" Tri Clover x 1" NPS Stainless Steel Concentric Reducer
Bulkhead for Mash Tun/Kettle Re-Circ Stainless Steel Tri-Clover Extension Tube 6" OAL - 1.5" TC Stainless Steel Tri-Clover 45° Elbow - 1.5" TC x 1.5" TC
Price: $27.04
Price: $26.99
Price: $22.99
The Bulkhead for Mash Tun/Kettle Re-Circ is made of 304 stainless steel. It’s intended use is to retrofit of a 10 gal Mash Tun. Stainless Steel Tri-Clover Extension Tube 6" OAL - 1.5" TC Stainless Steel Tri-Clover Elbow 45° - 1.5" TC x 1.5" TC
Stainless Steel Tri-Clover 90° Elbow - 1.5" TC x 1.5" TC Stainless Steel 3 Piece Ball Valve - 1/2" Female NPT Welded Kettle Kit
Price: $22.99
Price: $22.99
Price: $22.78
Stainless Steel Tri-Clover Elbow 90° - 1.5" TC x 1.5" TC WeldedKettle Kit.
Stainless Steel Tri-Clover Fitting - 1.5" TC x High Flow Barb Stainless Steel Tri-Clover Fitting - 1.5" TC x Male Camlock Stainless Steel Variable Length Weldless Bulkhead - 1/2" NPS x 2.5" Length
Price: $21.49
Price: $21.49
Price: $18.99
Stainless Steel Tri-Clover Fitting - 1.5" TC x High Flow Barb Stainless Steel Tri-Clover Fitting - 1.5" TC x Male Camlock Stainless Steel Variable Length Weldless Bulkhead - 1/2" NPS x 2.5" Length
Stainless Steel Sanitary Stainless Steel 90° Elbow Stainless Steel 3/8" Compression x 3/8" Compression Stainless Steel Elbow - 1/2" Male NPT x 3/8" Compression
Price: $18.49
Price: $19.99
On Sale!: $18.25
Price: $19.99
On Sale!: $16.99
90 Degree Stainless Steel Weld Sanitary Elbow Stainless Steel 3/8" Compression x 3/8" Compression Stainless Steel Elbow - 1/2" Male NPT x 3/8" Compression
Stainless Steel Thermometer 2" Probe Stainless Steel Cooler Bulkhead Thru-Wall Bulkhead Fitting - Stainless Steel (1/2" Female NPT)
Price: $16.99
Price: $16.99
Price: $16.49
Stainless Steel 1/2" npt. Primary use is for coolers. This product uses a 2" nipple. This bulkhead fitting is for thick walled coolers with a wall thickness between 5/8" minimum and maximum 3/4". Made from Stainless Steel, this thru-wall bulkhead fitting requires a 1" hole for installation. Designed for tighter spaces on brew pots and kettles. Used in many applications and threads in any half inch part. Go weldless with thermometers, thermowells,
Tri-Clover Compatible Thermowell Stainless Steel 2 Piece Ball Valve - 1/2" Female NPT Stainless Steel 1/2" Female NPT x 3/8" Compression
Price: $15.99
Price: $15.99
Price: $15.99
On Sale!: $14.99
Tri-Clover Compatible Thermowell Stainless Steel 2 Piece Ball Valve Full Port - Stainless steel ball valve with a two-piece body and full port. Each end of the valve has 1/2" female pipe threads. All internal contact points are stainless steel. Brewer's hardware in Canada. Brew Supplies Stainless Steel 1/2" Female NPT x 3/8" Compression
Stainless Steel Tri-Clover Thermowell - 1.5" TC (6" Length) Stainless Steel Tri-Clover Fitting - 1.5" TC x 1/2" Male NPT Stainless Steel Tri-Clover Fitting - 1.5" TC x 1/2" Female NPT
Price: $14.99
Price: $14.99
Price: $14.99
Stainless Steel Tri-Clover Thermowell - 1.5" TC (6" Length) Stainless Steel Tri-Clover Fitting - 1.5" TC x 1/2" Male NPT Stainless Steel Tri-Clover Fitting - 1.5" TC x 1/2" Female NPT
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression Blichmann Hex Nipple - 1/2" Male NPT x 1/2" Male NPT
Price: $17.99
On Sale!: $14.99
Price: $17.99
On Sale!: $14.99
Price: $14.99
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression Blichmann Hex Nipple - 1/2" NPT
Stainless Steel Weldless Bulkhead Stainless Steel Weldless Bulkhead - 1/2" Male NPT x 1/2" Female NPT Stainless Steel Mini Ball Valve 1/2" NPT Male
Price: $14.99
Price: $14.49
Price: $13.99
Stainless Steel Weldless Bulkhead - 1/2" Male NPT x 1/2" Female NPT Mini Ball Valve 1/2" NPT Male/ Female
Stainless Steel Tri-Clover Fitting - 1.5" TC x 1/2" Barb Stainless Steel Elbow - 1/2" Male NPT x 1/2" Compression Stainless Steel Weldless Cooler Bulkhead 1/2" Flat Gasket
Price: $13.99
Price: $15.99
On Sale!: $13.99
Price: $13.75
Stainless Steel Tri-Clover Fitting - 1.5" TC x 1/2" Barb 1/2" MPT x 1/2" Compression Elbow Fitting - Stainless Steel -- OntarioBeerKegs Stainless Steel Hardware Online Store for Home Brewery Parts and Fittings Canada Stainless Steel Weldless Cooler Bulkhead 1/2" Flat Gasket.
Stainless Steel 1/2" Male NPT x 3/8" Compression Stainless Steel 1/2" Compression x 3/8" Compression Stainless Steel 1/2" Compression x 1/2" Compression
Price: $14.99
On Sale!: $13.25
Price: $13.99
On Sale!: $12.99
Price: $13.99
On Sale!: $12.99
Stainless Steel 1/2" MPT x 3/8" Compression - 304 Type Stainless Steel Compression Fitting with 1/2" MPT - Hardware for Brewers Canada Stainless Steel 1/2" Compression x 3/8" Compression Stainless Steel 1/2" Compressioin x 1/2" Compression.
Stainless Steel Camlock - Female Camlock x 1/2" High Flow Barb Stainless Steel Mini Ball Valve 1/2" NPT Female Stainless Steel 1 Piece Ball Valve Female 1/2"
Price: $12.49
Price: $13.99
On Sale!: $12.45
Price: $13.99
On Sale!: $12.45
Stainless Steel Camlock - Female Camlock x 1/2" High Flow Barb Mini Ball Valve 1/2" NPT Female/ Female Stainless Steel 1 Piece Ball Valve 1/2" Female NPT. Two-piece body and a lock out handle.Both ends of this ball valve has 1/2" female pipe threads. Suitable for temperatures between -20 to 450. Home Brew Hardware
Premium Cooler & Keg Weldless Bulkhead 1/2" NPT Stainless Steel Female Quick Disconnect x 1/2" Barb Stainless Steel 1/2" Female NPT x 1/2" Compression
Price: $12.99
On Sale!: $12.25
Price: $10.99
Price: $13.75
On Sale!: $10.75
Premium Keg/ Cooler Weldless Bulkhead 1/2" NPT The female quick connect seals up very well without a lot of work when connecting. Will work with other SS quick connects. hese feature 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. Home brew supplies Stainless Steel 1/2" FPT x 1/2" Compression - 304 Type Stainless Steel Compression Fitting with 1/2" MPT - Hardware for Brewers Canada
Stainless Steel 1/2" Male NPT x 1/2" Compression Kettle Weldless Bulkhead 1/2" Flat Gasket Stainless Steel Weldless Elbow Kit
Price: $11.75
On Sale!: $10.65
Price: $9.99
Price: $9.99
Stainless Steel 1/2" MPT x 1/2" Compression - 304 Type Stainless Steel Compression Fitting with 1/2" MPT - Hardware for Brewers Canada Kettle Weldless Bulkhead 1/2" Flat Gasket Stainless Steel Weldless Elbow Kit
Stainless Steel Tri-Clover Fitting - 1.5" TC x Ferrule (Long) Stainless Steel Tee - 1/2" Female NPT x 1/2" Female NPT x 1/8" Female NPT Stainless Steel Camlock - Female Dust Cap
Price: $9.99
Price: $9.99
Price: $9.99
Stainless Steel Tri-Clover Fitting - 1.5" TC x Ferrule (Long) Stainless Steel Tee - 1/2" x 1/2" x 1/8" (FPT) - Compatible with Sight Gauge threads. Install on brew pot, add on plug, thermometer or ball valve. OntarioBeerKegs Brew Kettle Accessories Stainless Steel Camlock Type DC - Female Dust Cap - Hardware for Brewer's in Canada. OBK Home Brew Parts, Fittings, Equipment Online
Stainless Steel Camlock Type D - Female Camlock x 1/2" Female NPT Stainless Steel Camlock Type C - Female Camlock x 1/2" Barb Stainless Steel Camlock Type B - Female Camlock x 1/2" Male NPT
Price: $9.99
Price: $9.99
Price: $9.99
Stainless Steel Type D Camlock - 1/2" Female Camlock x 1/2" Female NPT. Can be used for many applications, commonly on the mobile end of hoses and connections. Similar to the Type B Camlock, except a Female NPT instead of male. Brewers Fittings & Hardware Stainless Steel Type C Camlock - 1/2" Female Camlock x 1/2" Hose Barb Use this barbed fitting to connect onto a male camlock. Add hose to your barb for quick connecting and disconnecting when you need it. OBK Hardware for Brewer's in Canada - Supplies Stainless Steel Type B Camlock - 1/2" Female Camlock x 1/2" Male NPT. Commonly installed on the more portable or "mobile" end. Can be coupled to a garden hose adapter to backflush plate chillers or to fill vessels with brewing water. Brewing Hardware OBK
Stainless Steel Female Quick Disconnect x 1/2" Female NPT Stainless Steel Female Quick Disconnect x 1/2" Male NPT Stainless Steel Tri-Clover Fitting - 1.5" TC Clamp
Price: $10.99
On Sale!: $9.45
Price: $10.99
On Sale!: $9.45
Price: $8.99
Stainless Steel Female Quick Disconnect 1/2" FPT -- Made from 304 stainless steel.  This features a 1/2" FPT on the other end for easy connectivity to almost everything. The quick disconnect will hold pressure for brewing applications when moving liquids Stainless Steel 1/2" MPT Female Quick Disconnect -- Made from 304 Stainless Steel. When this disconnect is used with the male QD they seal up very well in either flow of direction, with very little work in connecting them. Canadian SS Hardware Supply Stainless Steel Tri-Clover Fitting - 1.5" TC Clamp
Stainless Steel 45° Elbow Brass 1/2" Compression x 1/2" Female NPT 1" NPS Stainless Steel Lock Nut
Price: $8.50
On Sale!: $8.00
Price: $8.99
On Sale!: $7.99
Price: $7.99
45 Degree Stainless Steel Elbow. Brass 1/2" Compression x 1/2" Female NPT 1" NPS Locknut Stainless Steel 304 Fitting. Straight threaded with groove for o-ring.  1" - Fits Electric water heater element thread. Canadian Home Brewing Supplies, Equipment and Ingredients. Online Store.
Stainless Steel Camlock - Male Dust Plug Stainless Steel Camlock Type A - Male Camlock x 1/2" Female NPT Stainless Steel Camlock Type F - Male Camlock x 1/2" Male NPT
Price: $7.49
Price: $7.49
Price: $7.49
On Sale!: $7.00
Stainless Steel Camlock Type DP - Male Dust Cap - Hardware for Brewer's in Canada. OBK Home Brew Parts, Fittings, Equipment Online Stainless Steel Type A Camlock - 1/2" Male Camlock Connecter x 1/2" Female NPT. Commonly attached to pumps, plate chillers, and stationary brewing equipment. Compatible with Type B, C, D. - Quick Disconnects and Brewer's Hardware Canada OBK Online Supply Stainless Steel Type F Camlock - 1/2" Male Camlock x 1/2" Male NPT. Typically connected to the output of brew pots or mash-tuns (can also be used in a weldless system). Also popular on pumps and ports of plate chillers. Home Brewing Hardware and Fittings
Stainless Steel Camlock Type E - Male Camlock x 1/2" Barb Brass 1/2" Compression x 1/2" Male NPT Stainless Steel Tri-Clover Fitting - 1.5" TC x Ferrule (Short)
Price: $7.49
On Sale!: $7.00
Price: $9.99
On Sale!: $6.99
Price: $6.99
Stainless Steel Type E Camlock - 1/2" Male Camlock x 1/2" Hose Barb. Barbed camlock with 3/8" ID. OBK Home Brewing Supplies, Keg Equipment and Brewer's Hardware Canada Online Store for Fittings and Quick Connectors Brass 1/2" Compression x 1/2" Male NPT- Brass 1/2" Compression x 1/2" Male NPT~ Standard Compression Brass Fitting. Tube to Thread. Male Adapter , 1/2" comp x 1/2" NPT. Stainless Steel Tri-Clover Fitting - 1.5" TC x Ferrule (Short)
1 1/4" NPS Stainless Steel Lock Nut Stainless Steel Male Quick Disconnect x 1/2" Male NPT Weldless Kit for Thermometer
Price: $7.99
On Sale!: $6.99
Price: $6.99
Price: $6.97
1 1/4" Stainless Steel Lock Nut NPS 304 Fitting. Straight threaded with groove for o-ring.  1" - Fits Electric water heater element thread. Canadian Home Brewing Supplies, Equipment and Ingredients. Online Store. These are Full Port MPT Stainless Steel Quick Connects. These seal up very well in either flow direction when used with the female quick disconnect. Will work with other SS quick connects. Home brew supplies This kit will allow for a water tight installation in any converted keg or kettle without welds. Just drill a hole at 7"8", then use the parts provided. Parts include 1/2" Stainless Steel NPT Lock Nut, Silicone O-Ring & Stainless Steel 7/8" ID Washer.
Stainless Steel Tri-Clover Fitting - 1.5" TC End Cap Stainless Steel Male Quick Disconnect x 3/8" Barb Stainless Steel 3/4" NPT Lock Nut
Price: $6.49
Price: $6.49
Price: $6.49
Stainless Steel Tri-Clover Fitting - 1.5" TC End Cap Stainless Steel Male Quick Disconnect x 3/8" Barb Stainless Steel 3/4" Lock Nut
Brass Garden Hose Fitting - 3/4" Female GH x Female Quick Disconnect Stainless Steel Male Quick Disconnect x 1/2" Barb Stainless Steel 1" Square Head Plug
Price: $6.49
On Sale!: $6.00
Price: $6.99
On Sale!: $6.00
Price: $5.99
Brass Garden Hose Fitting - 3/4" Female GH x Female Quick Disconnect Stainless Steel Male Quick Disconnect 1/2" Barbed - Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 1/2" barbed end for easy connectivity to any 1/2" tubing. The Stainless Steel 1" Square Head Plug is made of 304SS. It is intended for use with 1" pipes and for use up to 150 PSI.
Stainless Steel Reducer Bushing 1" Male NPT x 1/2" Female NPT Brass 3/8" Compression x 1/2" Female NPT Stainless Steel Male Quick Disconnect x 1/2" Female NPT
Price: $5.99
Price: $7.99
On Sale!: $5.99
Price: $6.99
On Sale!: $5.99
Stainless Steel 1" MPT x 1/2" FPT Reducer Bushing Brass 3/8" Compression x 1/2" Female NPT Stainless Steel Male Quick Disconnect 1/2" FPT -- Made from Stainless Steel 304 -- 1/2" FPT. Stainless Steel Parts and Accessories Available at OntarioBeerKegs
Stainless Steel 3/4" Square Head Plug Stainless Steel Reducer Bushing 1/2" Male NPT x 3/8" Female NPT Stainless Steel Reducer Bushing 1/2" Male NPT x 1/8" Female NPT
Price: $5.79
Price: $5.79
Price: $5.49
The Stainless Steel 3/4" Square Head Plug is made of 304SS. It is intended for use with 3/4" pipes and for use up to 150 PSI. Stainless Steel 1/2" MPT x 1/4" FPT Reducer Bushing Stainless Steel 1/2" MPT x 1/8" FPT Reducer Bushing
Stainless Steel Coupler - 1" Female NPT x 1" Female NPT Stainless Steel Union Coupler - 1/2" Female NPT x 1/2" Female NPT Stainless Steel MFL Fitting-1/4"FFLX1/4"MPT
Price: $5.49
Price: $5.49
Price: $5.99
On Sale!: $5.00
304SS Coupler with 1" NPT Female Pipe Thread. Couplers have threads for insertion from both sides. 1" 5/8" Length. Stainless Steel Union Coupler - 1/2" Female NPT x 1/2" Female NPT Stainless Steel MFL Fitting 1/4" FFL x 1/4" MPT
Stainless Steel 45 Degree Elbow - 1/2" Female NPT x 1/2" Female NPT Stainless Steel Reducer Bushing 1/4" Male NPT x 1/8" Female NPT Stainless Steel Reducer Bushing 3/4" Male NPT x 1/8" Female NPT
Price: $5.49
On Sale!: $5.00
Price: $4.99
Price: $4.99
Stainless Steel 45 Degree Elbow 1/2" FPT to FPT - OBK Canada Homebrewing Stainless Steel Hardware Parts & Fitting Stainless Steel 1/4" MPT x 1/8" FPT Reducer Bushing Stainless Steel 3/4" MPT x 1/8" FPT Reducer Bushing
Stainless Steel Coupler - 3/4" Female NPT x 3/4" Female NPT Brass 3/8" Compression x 1/2" Male NPT Half Coupler 1/2" NPT
Price: $4.99
Price: $5.75
On Sale!: $4.99
Price: $4.99
304SS Coupler with 3/4" NPT Female Pipe Thread. Couplers have threads for insertion from both sides. 1" 1/2" Length. Brass 3/8" Compression x 1/2" Male NPT Half Coupler 1/2" NPT
Stainless Steel Nipple - 1/2" Male NPT x 1/2" Male NPT (2" Length) Kettle Cap - 1/2" Female NPT Stainless Steel Elbow - 1/2" Female NPT x 1/2" Female NPT
Price: $4.99
Price: $4.99
Price: $4.99
Stainless Nipple - 1/2" x 2" Threaded There is approximately a 1/2" of thread on both side of this fitting and a one inch section that is not threaded. Lock nuts do not work on this product. Home Brew Supplies Kettle Cap (1/2" Female NPT) This is a stainless steel 1/2" female NPT cap that can be used to plug an unused 1/2" NPT nipple. OntarioBeerKegs Canadian Home Brew Supplies and Kegging Online Supply Store Stainless Steel 1/2" Female NPT Elbow Canadian Home brew supplies
Stainless Steel Reducer Bushing 3/8" Male NPT x 1/8" Female NPT Stainless Steel Reducer Bushing 1/2" Male NPT x 1/4" Female NPT Stainless Steel Reducer Bushing - 3/4" Male NPT x 1/2" Female NPT
Price: $4.89
Price: $4.99
On Sale!: $4.75
Price: $4.99
On Sale!: $4.75
Stainless Steel 3/8" MPT x 1/8" FPT Reducer Bushing Stainless Steel 1/2" MPT x 1/4" FPT Reducer Bushing 304 Stainless Steel 3/4" MPT x 1/2" FPT Reducer Bushing
Stainless Steel Reducer Bushing 3/8" Male NPT x 1/4" Female NPT Brass Garden Hose Fitting - 3/4" Male GH x Male Quick Disconnect Brass Garden Hose Fitting - 3/4" Female GH x 3/8" Barb
Price: $4.69
Price: $5.99
On Sale!: $4.55
Price: $4.49
Stainless Steel 3/8" MPT x 1/4" FPT Reducer Bushing Brass Garden Hose Fitting - 3/4" Male GH x Male Quick Disconnect Brass Garden Hose Fitting - 3/4" Female GH x 3/8" Barb - Canadian Home Brew Hardware Supply - Online Store
Stainless Steel Nipple - 1/2" Male NPT x 1/2" Male NPT (1.5" Length) Stainless Steel Street Elbow - 1/2" Male NPT x 1/2" Female NPT Brass Compression Elbow - 1/2" Male NPT x 1/2" Compression
Price: $4.49
Price: $4.49
Price: $4.25
Stainless Steel Nipple 1/2" NPT x 1.5" Length -- 304 Stainless Steel Nipple 1/2" X 1/2" NPT (1.5" in length). Used to combine two fittings with 1/2" FPT threads. OBK Brewer's Hardware Canada This is a 1/2" 304SS Street Elbow. Male and Female 1/2" NPT ends. Home brew hardware Brass Compression Elbow (1/2" Compression x 1/2" Male NPT)
Stainless Steel Coupler - 3/4" Female NPT x 3/4" Female NPT Stainless Steel Coupler - 3/8" Female NPT x 3/8" Female NPT Stainless Steel Cross - 1/2" Female NPT
Price: $5.49
On Sale!: $4.25
Price: $4.99
On Sale!: $4.25
Price: $4.99
On Sale!: $4.25
Stainless Steel 3/4" Coupler - Parts & Fittings for Home Brewing Stainless Steel 3/8" Coupler Hardware Canada - 304 Stainless Steel Coupler with 3/8" NPT Female Pipe Thread. Couplers have threads for insertion from both sides. Brewing Hardware
Brass Garden Hose Fitting - 3/4" Female GH x 1/2" Female NPT Swivel Brass Garden Hose Fitting - 3/4" Female GH x 1/2" Barb Stainless Steel High Flow Elbow - 1/2" Female NPT x 1/2" High Flow Barb
Price: $4.49
On Sale!: $4.15
Price: $4.49
On Sale!: $4.15
Price: $4.49
On Sale!: $4.00
Brass Garden Hose Fitting - 3/4" Female GH x 1/2" Female NPT Swivel - OntarioBeerKegs - Canadian Home Brew Hardware Supply - Online Store Brass Garden Hose Fitting - 3/4" Female GH x 1/2" Barb - OntarioBeerKegs - Canadian Home Brew Hardware Supply - Online Store Stainless Steel High Flow Elbow - 1/2" Female NPT x 1/2" High Flow Barb
Stainless Steel 1/2" Male NPT x 3/8" Barb Elbow Stainless Steel 1/2" Female NPT x 1/2" Barb Stainless Steel 1/2" Square Head Plug
Price: $4.49
On Sale!: $4.00
Price: $4.49
On Sale!: $4.00
Price: $3.99
Stainless Steel 1/2" MPT x 3/8" Barb Elbow -- Great for the end of any 1/2" MPT spigot when space is tigh and there's a need to to turn your tubing as quickly as possible. Attach 3/8" tubing and you're all set. Hardware for Brewers in Canada Stainless Steel 1/2" FPT x 1/2" Barb. Brewing Hardware Canada - Online Shop for Homebrew Supplies, Equipment, Parts The Stainless Steel 1/2" Square Head Plug is made of 304SS. It is intended for use with 1/2" pipes and for use up to 150 PSI.
Brass Close Nipple 1/2" NPT Food Grade Plastic Fitting - 1/2" Male NPT x 3/4" Male NPT Adapter Stainless Steel Tee - 1/2" Female NPT
Price: $3.99
Price: $3.99
Price: $3.99
Brass Close Nipple 1/2" NPT Food Grade Plastic Fitting - 1/2" Male NPT x 3/4" Male NPT Adapter Stainless Steel Tee - 1/2" Female NPT
Stainless Steel Plug - 1/2" Male NPT Stainless Steel Reducing Coupler - 1/2" Female NPT x 1/4" Female NPT Stainless Steel Reducing Coupler - 3/4" Female NPT x 1/2" Female NPT
Price: $3.99
On Sale!: $3.85
Price: $3.99
On Sale!: $3.75
Price: $3.99
On Sale!: $3.75
Stainless Steel Reducing Coupler - 1/2" x 1/4" (FPT) Stainless steel coupler for reducing from 3/4" to 1/2". Female to female threaded. Ideal for March or Chugger pumps with a 3/4" Center Inlet! OBK Brewer's Hardware. Brew Hardware Online Canada. Reducer
Brass Garden Hose Fitting - 3/4" Male GH x 3/8" Barb Brass Garden Hose Fitting - 3/4" Male GH x 1/2" Barb Stainless Steel 3/8" Square Head Plug
Price: $3.99
On Sale!: $3.55
Price: $3.99
On Sale!: $3.55
Price: $3.49
Brass Garden Hose Fitting - 3/4" Male GH x 3/8" Barb Brass Garden Hose Fitting - 3/4" Male GH x 1/2" Barb The Stainless Steel 3/8" Square Head Plug is made of 304SS. It is intended for use with 3/8" pipes and for use up to 150 PSI.
3/8" Nut Food Grade Plastic Fitting - 1/2" Male MPT x 1/2" Barb Food Grade Plastic Fitting - 1/2" Male NPT x 3/8" Barb
Price: $3.49
Price: $3.49
Price: $3.49
Ss Brewtech 3/8 nut for ball valves, thermowells Food Grade Plastic Fitting - 1/2" Male NPT x 1/2" Barb Food Grade Plastic Fitting - 1/2" Male NPT x 3/8" Barb
Brass Adapter 1/4" Male NPT x 1/4" MFL Stainless Steel 1/2" Male NPT x 3/8" Barb Brass Coupler
Price: $3.49
Price: $3.49
Price: $3.50
On Sale!: $3.25
Brass Adapter (1/4" MFL x 1/4" Male NPT) - OntarioBeerKegs - Home Brew Hardware Supply - Online Store Stainless Steel 1/2" MPT (Male Pipe Thread) x 3/8" Barb Fitting. Canada Supplies of Home Brewing Ingredients & Equipment, Stainless Steel Parts, Hardware & Fittings, Keg Parts & Conversion Kits. Online Shop Deals Sales. Brass Coupler 1/2" NTP x 1"
Brass Barb 1/2" x 1/2" Female NPT Brass Barb 1/2" x 1/2" Male NPT Stainless Steel Banded Coupler - 1/2" Female NPT x 1/2" Female NPT
Price: $3.45
On Sale!: $3.25
Price: $3.15
On Sale!: $3.05
Price: $3.49
On Sale!: $3.00
Brass Barb 1/2" x 1/2" Female NPT Brass Barb 1/2" x 1/2" Male NPT Stainless Steel Banded Coupling - 1/2" Female NPT x 1/2" Female NPT
304SS Banded Coupling with 1/2" NPT Female Pipe Thread. Couplers have threads for insertion from both sides. 1" 1/4" Length - Stainless Steel Hardware
Stainless Steel 1/2" Female NPT x 3/8" Barb Stainless Steel Reducing Coupler - 1/2" Female NPT x 3/8" Female NPT Stainless Steel Coupler - 1/2" Female NPT x 1/2" Female NPT
Price: $3.49
On Sale!: $3.00
Price: $3.99
On Sale!: $3.00
Price: $3.75
On Sale!: $3.00
Stainless Steel 1/2" FPT x 3/8" Barb. Brewing Hardware Canada - Online Shop for Homebrew Supplies, Equipment, Parts Stainless Steel Coupler 3/8" FPT x 3/8" 1/2" FPT - Hardware for Brewer's in Canada - Parts, Supplies, Equipment - Homebrew Supply Online Store 304SS Coupler with 1/2" NPT Female Pipe Thread. Couplers have threads for insertion from both sides. 1" 1/4" Length Home Brew Supply Canada
Stainless Steel 1/2" Male NPT x 1/2" Barb Brass Barb 3/8" x 1/2" Female NPT Square Plug 1/2" NTP
Price: $3.49
On Sale!: $3.00
Price: $3.45
On Sale!: $2.99
Price: $2.99
Stainless Steel 1/2" MPT (Male Pipe Thread) x 1/2" Barb Fitting. Canadian Supplier of Homebrew Ingredients, Equipment. Stainless Steel Parts, Fittings, Disconnects. Keg Parts, Conversion Kits, Supplies.
Online Store Brass Barb 3/8" x 1/2" Female NPT Square Plug 1/2" NTP
Brass Barb 1/4" x 1/4" Male NPT Brass Barb 5/16" x 1/4" Male NPT Brass Barb 3/8" x 1/2" Male NPT
Price: $3.15
On Sale!: $2.99
Price: $3.15
On Sale!: $2.99
Price: $3.45
On Sale!: $2.99
Brass Barb 1/4" x 1/4" Male NPT Brass Barb 5/16" x 1/4" Male NPT Brass Barb 3/8" x 1/2" Male NPT
Food Grade Plastic Fitting - 1/2" Barbed Tee Stainless Steel 1 1/8" ID 'Slim' Washer Silicone Hose 1/2" (per foot)
Price: $2.99
Price: $2.79
Price: $2.79
Food Grade Plastic Fitting - 1/2" Barbed Tee The Stainless Steel 1 1/8" ID 'Slim' Washer -- The dimensions are 1 1/8" ID, 1 5/8" OD, and 1/16" thickness. It is made of 304 Stainless. Useful for keggle spacing and mashtun builds. Silcone Hose (1/2" ID, 3/4" OD). Flexible silicone tubing with a maximum operation temperature of 500°F. Perfect for post-boil wort and transferring of hot liquids. Homebrewing Supplies & Equipment Canada. Stainless Steel Parts, Fittings & Accessories.
Stainless Steel Close Nipple - 1/2" Male NPT x 1/2" Male NPT Brass Plug - 1/4" Male NPT Stainless Steel 1/4" Square Head Plug
Price: $2.79
Price: $2.99
On Sale!: $2.75
Price: $2.69
304SS Stainless Steel Nipple 1/2" X 1" M NPT. Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valves or other devices to a union. The Stainless Steel 1/4" Square Head Plug is made of 304SS. It is intended for use with 1/4" pipes and up to 150 PSI.
Stainless Steel 1/8" Square Head Plug Flanged Chrome Plated Brass Shank Lock Nut Brass Reducer Bushing 1" NPT x 1/2" FPT
Price: $2.39
Price: $2.99
On Sale!: $2.25
Price: $3.75
On Sale!: $2.25
The Stainless Steel 1/8" Square Head Plug is made of 304SS. It is intended for use with 1/8" pipes and for use up to 150 PSI. Flanged Chrome Plated Brass Shank Lock Nut Brass Reducer Bushing 1" NPT x 1/2" FPT
Stainless 1/2" NPT Lock Nut Stainless Steel 7/8" ID Washer Brass Reducer Bushing 1/2" MPT x 3/8" FPT
Price: $2.79
On Sale!: $2.10
Price: $2.99
On Sale!: $2.10
Price: $3.25
On Sale!: $2.00
Brass Reducer Bushing 1/2" MPT x 3/8" FPT
Stainless Steel 1/2" (Grooved) Nut Tri-Clover Silicone Gasket Large Tri-Clover EPDM Clamp Gasket 1.5" TC
Price: $2.99
On Sale!: $2.00
Price: $1.99
Price: $1.99
Stainless Steel 1/2" (Grooved) Nut This is a large tri-clover silicone gasket. It's Outer Diameter is 2 1/2", and it's Inner Diameter is 1 7/8". Tri-Clover EPDM Clamp Gasket 1.5" TC
Silicone Flat Washer (46mm OD) Brass Nut 1/2" NTP Brass Hexagon Plug - 1/4"NPT
Price: $1.89
Price: $1.99
On Sale!: $1.85
Price: $2.99
On Sale!: $1.75
Silicone Flat Washer (46mm OD). For use with 1" NPS Stainless Steel Lock Nut. Canadian Homebrew Supplier of Stainless Steel Parts, Fittings, Washers, Disconnects, Hardware. Online Store Brass Nut 1/2" NTP Brass Hexagon Plug - 1/4"NPT
Teflon Tape Silicone Flat Gasket 1/2" NPT 1/2" Camlock Silicone Gasket
Price: $1.75
Price: $1.49
Price: $1.49
Teflon Tape (aka Plumber's Tape) is used to wrap around your threaded brass or stainless steel connections. This will provide a tight seal and prevent leaking. Canada Supplies for Stainless Steel Hardware, Parts, Fittings and Connections Silicone Flat Gasket 1/2" NPT Silicone Gasket for 1/2" Stainless Steel Camlock Quick Disconnects - Food Grade - Hardware for Brewer's in Canada. OBK Home Brew Parts, Fittings, Equipment Online
Tri-Clamp Teflon Gasket l Tri-Clover Silicone Clamp Gasket 1.5" TC Dash 217 Silicone O-Ring for heating elements(1 3/16" ID X 1 7/16" OD)
Price: $1.35
Price: $1.25
Price: $0.99
Tri-Clamp Teflon Gasket Tri-Clover Silicone Clamp Gasket 1.5" TC USA FDA Approved. Thin wall Silicone O-Ring.
1.188" ID X .139" OD
Dash 211 Silicone O-Ring (13/16" ID X 1 1/16" OD) Silicone O-Ring (Thin 3/4" ID x 7/8" OD)
Price: $0.99
Price: $0.99
USA FDA Approved. Thin wall Silicone O-Ring. Silicon O-Ring - Silicon O-Ring 30* 5.7mm. Thick wall, works great for 1/2" NPT fittings. Price is each. Canadian Bulk & Wholesale Pricing for Retail and Vendors. OBK Home Brewing Supplies Ingredients Hardware Parts Equipment Draft Dispensing Kegs