> Homebrew Kegging > Pass-Through Tap - Kegerator Conversion Kits (Cornelius) >

Triple Tap Kegerator Kit (Cornelius)

Alternative Views:

Regular: $249.99
On Sale!: $214.99
Save $35.00!

Availability:: Usually Ships in 24 to 72 Hours
Product Code: 3KEG-KEGERATOR-PASS-THROUGH

Choose your connection:

CO2 Tank Options

Choose your Faucet:

Regulator

Dual product regulator allows you to set two different pressures. An example of use is two different styles. Or one for carbonating one for serving. Regulator body closest to the tank must be set at the highest pressure

Drip Tray

Choose your drip tray:

Faucet Wrench

Add a Faucet wrench:

Line Cleaner Kit

Add Line Cleaner Kit?:

Qty:

Description

Triple Tap Pass-Through Homebrew Kegerator Conversion Kit. We have all the assembly done for you so it installs in minutes. Choose between ball lock or pin lock connects. Drill three one inch hole and install!

Kit Includes:
Dual Gauge Regulator & Three Way Manifold Gas Distributor (with Check Valves)
Gas & Beverage Disconnects (Choice of Ball or Pin Lock - Barbed or Threaded)
6' of Bevlex 200 Beer Line for each tap & 4' of Ultraflex Gas Tubing for each gas outlet & inlet
3x Chrome Plated Faucet (with Tap Handles) + 4 1/8" Chrome Plated Beer Shank (with Tail Piece Assembly)
Stainless Steel Hose Clamps

*New (empty) Aluminum CO2 Tank is Optional

Features

Choice of disconnects three gas, three beverage.
4' Gas line per outlet.
6' of beer line per faucet.
All the clamps needed.
Dual Gauge Regulator. Primary Gauge to dial in pressure. Secondary Gauge to measure inert gas in the tank. Comes with Pressure relief valve. Built in on off switch with check valve to protect your regulator already installed. No tool necessary to adjust easy hand tuning. 5/16th barb makes installing our gas lines and hose clamps a snap.
The CO2 Tank. Manufactured recently these will not need to be retested for five years. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.
Three Chrome plated brass faucets.
Three Chrome plated 4 1/8" shank and tailpiece assemblies.
Three way brass manifold with 5/16" barbs with check valves.
Three standard black plastic tap handles.