Stainless Steel Carbonation Oxygen Stone - 1/4" MFL (2.0 Micron)

Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation.It has a 1/4" MFL connection, allowing you to attach it to a swivel nut or anything with a 1/4" FFL connection. (Note: if you are using an aeration pump, we recommend a "deep water" type for aquariums, as these will have the necessary PSI to force the air through the stone and into the wort)

Sanitizing your Diffusion Stone: To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the stone for 1-3 minutes to help break down anything within it. If boiling is not an option, we recommend soaking in Star San, which will remove a majority of surface contamination/bacteria, but will not sanitize the interior of the stone which may or may not be contaminated.

---

Specifications:

• Made out of 304 Stainless Steel
• 2.0 Micron Stone
• 1/4" MFL Connection

Dimensions:

• 1 7/8" Total Length
• 1" Stone Length
• 1/2" Diameter