11.7 Gallon Mash King Cooler with False Bottom

Mash King Tun With Trub Trap Bottom - 11.7 Gallon (45L)

Mash King

12 Review(s) Write a Review

Status: In Stock

Available: 99999

Feature: Mash King

Feature 5 30044

component-1 *

mash-king-trub-trap-hardware (1)

component-2 *

mash-king-cooler-false-bottom (1)

component-3 *

11-7-gal-mash-king (1)

Quantity

Overview
Customer Reviews

This Mash King Tun is a supersized 11.7 Gallon/43 Litre beast! The 17% volume increase over traditional coolers ensures you can brew what you want when you want it. Specially built and designed to handle the largest grain bills you can throw at it. Brewing a 1.09 original gravity brew? The Mash King Tun will easily handle it.

This Tun comes with The Trub Trap. Designed to fit perfectly and secure, not float around the bottom like other models. What makes this false bottom special is that it has custom sizing coupled with the silicone gasket, ensuring the tightest fit possible without the worry of scratching up the interior of your cooler. In addition, the false bottom is made out of strong 304 Stainless Steel and the legs allow it to sit 2 3/4" off the bottom of your cooler, and the handle makes removal a breeze.

The Mash King's inside dimensions are 19" x 13 1/4". With its outside dimensions(with lid) being 21 3/8" x 15 1/2".

False Bottom Diameter: 13 1/4"

Please note: Do not lift or carry the cooler by the handles when full

Specifications:

Made out of sturdy and lightweight plastic
11.7 Gallon Capacity (43 Litres)
Massive capacity that is perfect for large-scale homebrewing
The handle is collapsible for easy storage
Improved lid, locks securely in place
All hardware is made from stainless steel for durability and hygiene

Includes:

Mash King Cooler - 11.7 Gallon x 1
Stainless Steel 2-Piece Ball Valve - 1/2" Female NPT x 1
Stainless Steel Close Threaded Nipple - 1/2" NPT x 1
Stainless Steel Barbed Fitting - 1/2" NPT X 1/2" OD Barb x 1
Grooved Lock Nut x 1
Stainless Steel Washer - 7/8" ID x 1
Silicone O-ring x 1
Mash King Stainless Steel Cooler False Bottom x 1

Inside Dimensions:

19" Height
13 1/4" Diameter

Outside Dimensions (with Lid):

21 3/8" Height
15 1/2" Diameter

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

3.7

I'Ve Used This Twice Now Since Purchasing

Pros:- Large mash tun capable of doing 10 batch spargers- Holds temperature- False bottom & hardware are excellentCons:- Since it is large the lid can be a bit tricky to get on sometimesHighly recommended!

Did you find this helpful? 5 of 5 Found Helpful

Reviewed by:
Jamie Archibald
from Dartmouth, NS Canada on 7/17/2016

So Far So Good

I've brewed 5 batches so far and no problem to report. Does the job.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by:
Isa
from QC on 1/13/2019

Ok Product But Concerned

I've used the vessel 4 times since purchasing. It works fine in terms of holding temperature, the false bottom adequately filters with little to no grain slipping through. However, a concern arose on my last brew when the vessel began making an odd creaking noise during the initial duration of the mash period. later, after emptying the vessel, I noticed the interior wall had buckled with heat as if it had de-laminated from it's original form. I'm also seeing pressure indentations on the bottom surface where the legs of the false bottom sit.we'll see over the next number of brew days how well this thing holds up... I'll be mighty pissed if this thing pops a hole with such minimal usage.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Ronv
from Ottawa, ON Canada on 1/15/2018

Tricky To Manage Batch Sparging

Be mindful that the volume in the area below the trap is 6.6 litres approximately. This will be discounted from your sparge water volume. You will end up rinsing the grains with less water...after collecting the 1st wort, the bottom area will be almost empty, so your sparge water will go straight to the bottom...remember, you are already starting to sparge with less water (the volume you discounted from your sparge volume because of the false bottom) and most of your sparge will go to the bottom, limiting the rinsing of the grains a lot.It a little messy to use...decided to by a bazooka screen and not use the false bottom next time to compare. It's disappointing as I am quite sure that there was a big price for the false bottom compare to a bazooka screen of 8 dollars in Ali Express.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Alp
from Calgary, AB Canada on 10/11/2017

Preston Marriot

Cooler works awesome. No grains get by the side at all the fit is perfectly flush against the wall with the silicone gasket.For the other user with the issues I measured the bottom and the holes are 3/32 on 5/32 centers. Means it is the same configuration as all the big high end players like SS Bretech and Nor Cal. If you are getting grain through this you need to lower your pump speed or adjust the dust out of your crush. The only finer holes out there for a mash tun are brew in a bags, I would rather have a stainless strainer then fabric.CheersPreston

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Preston
from Merrickville, ON Canada on 3/22/2017

Immense Disappointment

I just tried this product for the first time today and it was a total bust. The false bottom did not serve to strain the grain at all, no matter how much I vorlaufed. I made sure that the FB had a snug fit, before adding my strike water (To OBK's credit, it did fit snug). However, it did not seem to matter. 1/5.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Jeff
from London, ON Canada on 10/23/2016

homebrewer

This product works great at holding heat... however since the day i owned it it leaked where the valves connects. Doesn't affect me too much when grain is in during the mash as that holds the water too. still annoying.

Did you find this helpful?

Reviewed by:

from Hornby Island on 5/25/2025

Bubble In Walls

Bought in March 2020I currently have two bubbles forming inside the mash tun opposite each other. This is now making it difficult to place the false bottom inside the mash tun.Hot water has never been beyond mashing requirements 167F, to compensate for cooler grain and mixing time to achieve 154F mashI really liked the false bottom and I did read the reviews and was cautious about water temp.The mash tun worked well for the first couple of brews before the bubbles started, now the false bottom sits on a angle.and will not fit into place.Overall I am disappointed with the longevity of the product and do not recommend.

Did you find this helpful?

Reviewed by:
Alan
from Barrie on 9/4/2020

Lamination Issue/False Bottom Doesn't Hold Up

I'm having the same issue with the bubble forming on the inside. I can still use it, but if gets any worse the false bottom won't be able to be inserted/removed. The handle and feet on the false bottom lasted about 3 brews before I had to get them reattached by a local welder - the factory spot welds simply don't hold up. Make sure you scoop out as much wet grain as possible before removing it for cleaning to make it easier on the handle. Aside from those issues it does its job.

Did you find this helpful?

Reviewed by:
Kevin
from Georgetown, ON Canada on 7/29/2019

Great Tun

As far as cooler mash tuns goes this one is really good. We have done 20+ batches in this thing and haven't had any issues yet. It holds heat well and the false bottom is great. No stuck sparges yet. It does take a little work to figure out your water to grist ratio since the false bottom keeps about a gallon of water away from the grain. If you use brewing software like Beer Tools Pro or Beersmith you can factor this in and it makes batch to batch consistency much easier. The area where the valve is placed on the bottom is a little thin but this is to be expected with a cooler. It doesnâ€™t leak so no complaints. This thing is also huge. Large enough for any 5 gallon batch well into the 1.100 gravity range. Also works for 10 gallon batches if the gravity is reasonable. Over great entry level setup for a great price.

Did you find this helpful?

Reviewed by:
Will
from Victoria, BC on 5/4/2018

Great Mlt

This is as good as it gets for a picnic cooler style mash tun. Some of the concerns I have read are quite ridiculous, of course you will have to account for dead space in your HLT and MLT, you should build that into your brewing software calculations. Of course some particles will get through, this isn't a recirculating vessel, its a cooler with a big filter. I have brewed about 25 batches with mine and have zero complaints whatsoever. Is it a 500$ SS mash tun with a chugger pump ? No. Is it a high quality MLT with good fittings and a false bottom as good as any? Yes .

Did you find this helpful?

Reviewed by:
Brian
from Calgary on 1/31/2018

What A Change!!

Went from two bucket system to this beauty. First brew was seamless and loved the filter bottom. So pleased I ordered another to do simultaneous brews - only adds another hour or so to brewing day and you get two beers or can use it to make a Wee Heavy full batch.

Did you find this helpful?

Reviewed by:
Ernest Sargent
from Victoria, BC Canada on 3/23/2017

Mash King Tun With Trub Trap Bottom - 11.7 Gallon (45L)

Choose Options

Rating Snapshot

Average Customer Ratings

Mailing List