Stainless Steel Weldless Cooler Kit (3 Piece)

Replace the standard plastic spigot on your cooler with this heavy duty stainless steel ball valve and bulkhead cooler kit. Simply removed old spigot and install the kit in the stock hole, tighten the coupler on the inside of the cooler. This will allow for use as a mash tun or hot water tank.

Optional 1/2" or 3/8" barb for attaching tubing to perform transfers. Inside coupler allows for any 1/2" attachment. Sealing o-ring is high-temperature, food-grade. Maximum usable clearance of about 1" (Minimum 5/8"). Measure your cooler wall before purchase.

---

Specifications:

• Made of 304 Stainless Steel
• Fully Serviceable 1/2" Female NPT 3-Piece Ball Valve
• Full port
• Full coupler added in the back of the valve to allow the addition of any 1/2" Male NPT fittings
• Comes with a bulkhead fitting for a watertight seal
• Minimum Wall Thickness of 1/4"
• Maximum Wall Thickness of 5/8"

Includes:

• Stainless Steel Hose Barb (3/8" or 1/2") x 1
• Stainless Steel Weldless Cooler Bulkhead - 1/2" NPT (2 1/2") x 1
• Stainless Steel 3-Piece Ball Valve - 1/2" Female NPT x 1