Stainless Steel Weldless Spigot Kit for Brew Pot

Stainless Steel Weldless Spigot Kit (3-Piece)

2 Review(s) Write a Review

Status: In Stock

Available: 99999

Feature: 1/2" NPT

Feature 5 20061

component-1 *

weldless-bulkhead (1)

component-2 *

3pc-ball-valve (1)

component-3 *

ss-halfmpt-halfbarb (1)

Quantity

Overview
Sizing Chart
Customer Reviews

Weldless Spigot Kit made with 100% Stainless Steel, safe for all beer passing through and heavy duty for years of use. This is for kettles, keggles and pots. Features a 1/2" three piece ball valve and 1/2" barb, depending on your preference. A full coupler has been added in the back of the spigot to allow for any addition you choose for 1/2" male npt fittings.

This item requires a 7/8" drill bit for installation on a brew pot or keggle, the bulkhead fitting provides a watertight seal.

Specifications:

Made of 304 Stainless Steel
Fully Serviceable 1/2" Female NPT 3-Piece Ball Valve
Full port
Full coupler added in the back of the valve to allow the addition of any 1/2" Male NPT fittings
Comes with a bulkhead fitting for a watertight seal

Includes:

Stainless Steel Hose Barb (1/2") x 1
Stainless Steel Weldless Bulkhead - 1/2" NPT (3") x 1
Stainless Steel 3-Piece Ball Valve - 1/2" Female NPT x 1

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.0

Easy Installation

Installation is very easy and closely follows other products. Fits snugly with no leaks the first time. Everything came with plenty of teflon tape already applied. The inside fits a bazooka screen nicely.Edit: If you find that you aren't getting enough thread for the ball valve, check that you have the fitting installed the right way. It also helps to tighten the nut.

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by:
Addison Babcock
from Edmonton, AB Canada on 9/3/2014

Good - Union Should Be Longer

Good product the only issue is the union is very short, I am lucky to have 3 threads holding on each side- will have to replace with proper fitting

Did you find this helpful?

Reviewed by:
Fred Clark
from Coldwater, ON Canada on 2/17/2014

National Pipe Thread (NPT) Fitting Size:	Outer Diameter (inch):	Threads Per Inch (Pitch):
1/16"	0.3125"	27
1/8"	0.405"	27
1/4"	0.54"	18
3/8"	0.675"	18
1/2"	0.84"	14
3/4"	1.05"	14
1"	1.315"	11.5
1 1/4"	1.66"	11.5
1 1/2"	1.9"	11.5
2"	2.375"	11.5
2 1/2"	2.875"	8
3"	3.5"	8
3 1/2"	4"	8
4"	4.5"	8
5"	5.563"	8
6"	6.625"	8
8"	8.625"	8
10"	10.75"	8
12"	12.75"	8

Stainless Steel Weldless Spigot Kit (3-Piece)

Choose Options

Rating Snapshot

Average Customer Ratings

Mailing List