> Brewing Equipment >

30 Plate Wort Chiller (B3-12A-30ST) - 3/4" Garden Hose X 1/2" OD Barb (7 1/2")
30 Plate Wort Chiller (B3-12A-30ST) - Garden Hose x 1/2" Hose Barb (7 1/2")
 
The 30 Plate Wort Chiller (B3-12A-30ST) - Garden Hose x 1/2" Hose Barb (7 1/2") is a high performance chiller, saving you water and time. It has integrated garden hose fittings that are welded directly into the unit making hooking up a breeze. There is one male and one female garden hose fitting on the unit, one at each end. Intending for you to hook the female end up to your faucet, while the male end is meant to be connected to another hose to allow for the heated water to exit the exchanger. In addition two 1/2" hose barbs are welded right into the unit, to allow easy connections to 1/2" tubing for the beer wort side.


Additional Specifications
Part# B3-12A-30ST
UL Listed
304 Stainless Steel
99.9% Copper Brazing
Heat Exchange Surface Area: 558 square inches
Max Temperature: 225C/430F
Max Flow Rate: 15.5 GPM

Dimensions
Length: 7 1/2"
Width: 2 3/4"
Height: 2 7/8"
Price: $149.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

B3-12A-30ST (30 Plate Wort Chiller) - Garden Hose x 1/2" Hose Barb (7 1/2")

Specifications:
  • Part # B3-12A-30ST
  • UL Listed
  • Made out of 304 Stainless Steel
  • 99.9% Copper Brazing
  • Heat Exchange Surface Area: 558 square inches
  • Max Temperature: 225C/430F
  • Max Flow Rate: 15.5 GPM
  • 30 Plate
  • 3/4" Female Garden Hose Connections
  • 1/2" OD Barb Connections
  • Fluid Flow Directions: F3 to F1, F2 to F4

Dimensions:
  • 7 1/2" Length
  • 2 3/4" Width
  • 2 7/8" Height

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
 
4 of 5 Great cooler June 7, 2019
Reviewer: Chris RA from Ontario  
First impressions were great, overall well constructed and good finish.

Worked great to cool wort when combined with a camlock fitting and a Robo Brew v3.1.

Cleaning was equally easy, during normal pbw cleaning the robobrew, I used the pump too flow through chiller. Sanitized the same method but with boiling wort for last 5 minutes.

My only complaint is it didn't come with the mounting bolts that are showed in the picture.  I had to go to manufacturers website to find out.  According to them it's a M5-0.8 bolt.


Was this review helpful to you?