3 Piece Stainless Steel Ball Valves

Stainless Steel 3-Piece Ball Valve - 1/2" Female NPT

23 Review(s) Write a Review

Status: In Stock

Available: 1931

Feature: 1/2" NPT

Feature 5 20105

Quantity

Description
Additional Details
Customer Reviews

These 3-piece, 304 Stainless Steel ball valves have 1/2" FNPT allowing the use of NPT hardware to make your connections. All internal contact points in this ball valve are also Stainless Steel, making it safe for use when making wine too!

Thread Type*: National Pipe Thread (NPT)

*BSP and NPT/NPS threads are NOT compatible with each other. When purchasing threaded hardware, it's crucial to verify that you are selecting the appropriate threaded fittings to meet your requirements. Unsure about thread type? Please consult the NPT thread chart HERE.

Specifications:

Made out of 304 Stainless Steel
Fully serviceable
1/2" Female NPT Connections
Full port
Handle colours may vary from picture

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.9

Completely Serviceable, Great Value

You can easily take this whole thing apart to clean and service. As an added benefit, when installing your ball valve and it can't be tightened anymore but you don't have the desired orientation you can take it apart and rotate the handle/ball portion. I doubt you will find a better value anywhere.

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by:
Justin A.
from Guelph, ON on 9/3/2014

Worth It!

This reasonably priced three-piece valve is worth the slightly higher price tag compared to the two-piece ball valve. I have had some nasty crud build up over time in the ball valve in BK, and it has been pretty easy to take apart and clean out.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Matt Vierimaa
from Kingston, ON Canada on 4/16/2014

Clean And Simple

Valve is easy to use and clean, fantastic.

Did you find this helpful?

Reviewed by:
Jarrod
from Vancouver, BC on 7/17/2016

The Valve To Have

easy to maintain, easy to fix, not to expensive and it look badass, what else to say!

Did you find this helpful?

Reviewed by:
N/A
from Trois-rivières, QC Canada on 1/2/2016

Easy To Disassemble And Clean

Great product. Very easy to clean

Did you find this helpful?

Reviewed by:
Mike Cooke
from Toronto, ON Canada on 2/22/2015

Good Quality, Great Price

very good value and appears to be top quality, have several of them in my system!

Did you find this helpful?

Reviewed by:
Eric Cousineau
from Toronto, ON Canada on 5/30/2014

Gorgeous And Functional

These work great, are easy to clean, and are great looking! Haven't seen a better deal than this in the area

Did you find this helpful?

Reviewed by:
Erik
from hamilton, ON Canada on 2/13/2014

Perfect

excellent value, well made and perfect for the many years to come

Did you find this helpful?

Reviewed by:
David Pearson
from Amherst, NS Canada on 12/10/2013

Awesome Valve!

At first i bought one for my mash tun. I was planning on buying 2 parts valve for the rest of my brewing build. Then you guys brought christmas sooner for me. At this sale price I bought 3 more to fit on my HLT, Boil kettle and brew pump. Thanks a lot.

Did you find this helpful?

Reviewed by:
Guillaume Charbonneau
from sainte Victoire de Sorel, QC Canada on 9/27/2013

Perfect

These are perfect for home brewing and none brewing applications. they come apart easy for cleaning and they look cool on the mash tun.

Did you find this helpful?

Reviewed by:
Phillip Dumala
from saanichton, BC Canada on 9/16/2013

Awesome

These valves are the cats arse, nothing better. Buy 'em on sale and they get even better!

Did you find this helpful?

Reviewed by:
Shawn Seiersen
from Victoria, BC Canada on 8/31/2013

They Thought Of Everything

A great valve for managing your product. The handle comes with a sliding lock to prevent it from opening at the wrong time. If necessary a small lock can be used to secure it open or closed. For a few dollars more make sure to order a 1/2 barb, 1/2 silicone hose and a hose clamp.

Did you find this helpful?

Reviewed by:
Dan
from Aurora, ON Canada on 8/26/2013

Great Value

Solid build and does the job.

Did you find this helpful?

Reviewed by:
JF
from Qc on 8/22/2013

Great Valve, Solid As A Tank, Easily Cleaned

Love this thing, definitely worth the pennies for it and a must for anyone using the OBK brew pots.

Did you find this helpful?

Reviewed by:
Jozef Winter
from Toronto, ON Canada on 8/15/2013

Does The Job

This valve has a nice little latch that prevents accidental opening. Nice feature. Movement is smooth and it is easy to disassemble and reassemble for cleaning etc. If you are ordering separately from our pot remember to order the adapter.

Did you find this helpful?

Reviewed by:
Gabriel Smith
from Guelph, ON Canada on 8/5/2013

3 Piece Ball Valve

Great product. Disassembles adn reassembles easily.

Did you find this helpful?

Reviewed by:
Kevin
from ON Canada on 8/4/2013

Great Ball Valve

Very high quality parts, seals perfectly, and has a safety lock to prevent accidental opening/closing. Buy this one!

Did you find this helpful?

Reviewed by:
Marc Lapierre
from Kanata, ON Canada on 8/4/2013

Great Product

Well built and easy to disassemble and clean.

Did you find this helpful?

Reviewed by:
Wo
from MB Canada on 7/31/2013

Excellent

These are excellent quality. Great for when you need to align your ball valve and also for cleaning. They do take a bit of work to disassemble though.

Did you find this helpful?

Reviewed by:
Colin
from Guelph, ON Canada on 7/31/2013

Easy Cleaning

Super easy to disassemble and clean. Don't waste your time with other valves that requires bigger tool set and are tougher to clean up

Did you find this helpful?

Reviewed by:
Philippe
from Chicoutimi, QC Canada on 7/31/2013

High Quality

This is a very high quality product that works flawlessly. Only fault is that it sticks out quite far, making it a bit more prone to getting in the way.

Did you find this helpful?

Reviewed by:
Jeffery
from Victoria, BC Canada on 7/30/2013

Great Solid Valve

Works great, solidly built and will last forever. Easy to disassemble and clean. My only complaint is that I melted the plastic handle covering on a propane burner. Probably my own fault but Silicone would be a better material for the handle cover.

Did you find this helpful?

Reviewed by:
Robert Reynolds
from victoria, BC Canada on 7/26/2013

Awesome

I bought a couple of these for my keggles and have been super-pleased with how sturdy they are. I'm a clutz and have smashed them into a couple things and they've won every battle they've had with other objects :DValve is smooth and easy to use, will buy more when I finish up my e-brewery :)

Did you find this helpful?

Reviewed by:
Paul
from Ottawa, ON on 4/8/2013

3 Piece Ball Valve Replacement PTFE Ball Seat

PTFE 3-Piece Ball Valve Seat

(0)

$6.79

In Stock

Add To Cart

Mash King 3-Piece Ball Valve Grip

(0)

$2.99

In Stock

Add To Cart

Size:	Body Length:	Handle Length:	Material:	Type:
1/2" FNPT (Female NPT)	2 7/8" (7.30cm)	2 3/4" (7.00cm)	304 Stainless Steel	NPT 3 PC Ball Valve

Stainless Steel 3-Piece Ball Valve - 1/2" Female NPT

Rating Snapshot

Average Customer Ratings

Accessories

Mailing List