> Draft Equipment > Carbonating > Manifolds & Distributors >

4 Way Gas Distributor (Manifold) - 3/8" OD Hose Barb Connections
4 Way Gas Distributor (Manifold)
 
Four way manifold comes with 3/8" OD inlet with four 3/8" OD outlets makes a secure fit on 5/16" and 3/8" gas line. This solid CO2 distribution manifold will serve four products from just one tank. Mount the manifold to the wall, and be confident that this commercial quality piece of equipment will deliver the CO2 you need to properly dispense and enjoy your draft beer.

  • Anodized ends to prevent rusting issues
  • Factory tested for leaks
  • Easy to mount Mounts flush to wall, so it takes up less space
  • Commercial quality
  • Shut offs have built in one way check valves
Price: $38.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

4 Way Gas Distributor (Manifold) - 3/8" OD Hose Barb Connections


Average Customer Review: 4.5 of 5 Total Reviews: 16 Write a review.

  0 of 0 people found the following review helpful:
 
What you need for multiple tanks October 11, 2017
Reviewer: Paul from Waterloo, ON  
The manifold is a solid piece of metal and makes it easy to control an octopus of gas lines.

Mine was likely an odd one out, with a couple of quality problems. One valve leaked around the stem while turning it on or off. Not a major problem, but a bit disconcerting. However another valve had metal debris in the check valve and wouldn't deliver gas until I took the valve out and cleaned it.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
First one leaked, Excellent Customer Service February 23, 2016
Reviewer: Nick from Kitchener, ON Canada  
The first four way manifold I received was placed with an order to add 2 taps to my keg fridge.  Sadly, it quite obviously leaked a significant amount after installation.  The excellent customer service at OBK solved this problem quickly though.  I was shipped a new manifold in a timely fashion and now there are no leaks! Thanks OBK!

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
pretty good, but check the input valve August 20, 2014
Reviewer: Bruce from Courtenay, BC  
Had some frustrating issues after installing this, with no gas coming through into the kegs. It turned out that the input valve on the side of the manifold was a check valve similar to what was on the output sides, with a ball lock within to prevent backflow. Thus, no gas would go into the manifold from my CO2 tank. After checking all my other connections, I had to take the valve off the manifold and pop out the ball and washer inside, then reinstall. It worked like a charm after that, but it was a pretty irritating session of troubleshooting to get it working properly. It should have worked properly out of the box.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Why 3/8"? August 13, 2014
Reviewer: Rod from New Brunswick  
All of my 1/4" barbed corny connections take a 1/4" ID hose, so I assumed that the manifold would fit the same hose. Not so much, they are 3/8". Now I've got to go buy new 5/16" hoses that will work on both barbed fittings. Why isn't the manifold built to work out of the box with standard corny sizes?

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Solid unit June 7, 2014
Reviewer: Anonymous Person from Ottawa, ON  
Sturdy, no leaks.

Was this review helpful to you?

View All Customer Reviews