> Hardware >

5500W,240VScrew In Element LWD LimeLife Camco model 2935 Foldback,SS Bush
Camco 5500W heater ripple element (LWD).
 
Alternative Views:


Brewing beer using an electric stovetop is a great way to increase your level of control during the boiling process. While using an electric stove is great for novice home brewers, it requires homebrewers to invest in additional equipment especially if they do not have such kind of stove in the first place. Adding an electric heating element directly to the brew kettle is a great idea for home brewers as it saves a lot of the working space as a stove is no longer necessary to heat up the wort.

The heating element is 10" long and provides extreme heat thanks to its 5500W heating capacity. This screw-in heating element provides even heat to the wort, thus producing an even boil in the shortest possible time. Since this heating element will be immersed in the wort, the liquid allows efficient heat transfer for even boiling. It also prevents caramelization and scorching at the bottom of your brew pot. It is made from a nickel-chromium stainless steel that allows for extra strength and resistance towards dry firing, which is heating the kettle without water.

It can easily be installed using a 1" nut. The Camco Model 2935 screw-in heating element can fit most types of water heater brands such as Bradford White, American, AO Smith, Kenmore and many others. Since this is a high current and voltage heating element, proper installation should be done to avoid serious injury or electrocution. Camco model 2935.

Please Note: The threading for Camco heating elements are Nominal Pipe Size (NPS) where as most hardware on our site use National Pipe Thread Taper (NPT) threading. Camco heating elements WILL fit NPT hardware, if you are having trouble threading them on completely please use Teflon Tape.
Price: 34.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

5500W,240VScrew In Element LWD LimeLife Camco model 2935 Foldback,SS Bush

This heating element is made from a nickel-chromium stainless steel alloy sheath that is resistant to dry firing. This means that even if you forgot to put the liquid inside the kettle, the heating element does not easily burn up.

It is compatible with different kinds of water heaters and can easily be installed using a 1" lock nut. However, it can only fit inside a brew tank that has a minimum diameter of 12 1/2" or larger.

  • Total Length: 12"
  • Element Length: 10"
  • 1" Male NPS threading

UL Listed for use in Canada
Made in USA

WARNING!!! This is a high voltage and current element, incorrect installation can result in serious injury or death! OntarioBeerKegs recommends consulting an electrician prior to use.

May we also suggest...
1" NPS Stainless Steel Lock Nut
Price: 5.79

Add
1" NPS Locknut Stainless Steel 304 Fitting. Straight threaded with groove for o-ring.  1" - Fits Electric water heater element thread. Home Brewing Equipment, Supplies and Ingredients. Online Store.

Share your knowledge of this product with other customers...
Click here to write a review