> Brewing Equipment >

8 Gallon Stainless Steel Welded Graduated Brew Kettle
8 Gallon Welded Stainless Steel Advanced Brew Kettle
 
Alternative Views:


8 Gallon welded couplers with graduated markings Brew Kettle - Two welded 1/2" coupler brew kettle made from polished stainless steel.8(US) gallons (30L, 32 Quart) total volume with graduated volume markings from 1 to 7 gallons. A taller height to width ratio improves the boil, which leads to better beer. This brew kettle features welded port connections and includes a stainless steel three piece ball valve, in addition to a 2" probe thermometer (with the option to upgrade). Includes lid.

This is an entry level pot. It is a thinner gauge then our brand name 304SS kettles like OBKettle, SS Brewtech, Blichmann. Some dents and minor imperfections may be on the pot.

We recommend you purchase this product by itself. Shipping items inside the pot increases chances of damage during shipping. We will of course ship items inside a pot if you want. But we can not assume liability for damage if you choose to do so.

FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle! The Every Drop Dip Tube is designed to thread onto the interior side of the ball valve coupler. When installed the angle can be easily adjusted to help pick up every last drop from your kettle. Make the most out of your kettle with this FREE accessory!


Full Kettle Comparison Chart
Price: 104.99


Availability: Usually Ships in 24 Hours

Thermometer Options

2" Probe Thermometer
6" Probe Thermometer [Add 5.00]
5" Probe Adjustable Angle [Add 37.50]
3" Probe Blichmann BrewMometer [Add 22.00]
Inside Port Options

Not required.
6" Bazooka Screen [Add 10.99]

Quantity:  
Features
 

8 Gallon Stainless Steel Welded Graduated Brew Kettle

Features:
  • Graduated Volume Markers (From 1 to 7 Gallons)
  • Made from Polished Stainless Steel
  • Includes 2" Probe Thermometer with 3" Face (with Optional Upgrade)
  • Includes Stainless Steel 3 Piece Ball Valve
  • Both welded ports are 1/2" Female NPT Connection
  • FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle!

Inner Kettle Dimensions:
  • Height 17" (43cm) x Diameter 11 7/8" (30 cm)

Welded coupler locations:
  • 1 1/2" (3.8 cm) From Center of Bottom Port to Bottom of the Inside of the Kettle
  • 6 5/8" (16.8 cm) From Center of Thermometer Port to the Bottom of the Inside of the Kettle

May we also suggest...
Stainless Steel 1/2" Male NPT x 1/2" Barb Bar Keepers Friend Cleanser and Polish Powder (12 oz) Custom holes
Price: 2.79

Add
Price: 4.99

Add
Price: 14.99

Add
Stainless Steel 1/2" MPT (Male Pipe Thread) x 1/2" Barb Fitting Bar Keepers Friend Cleanser and Polish Powder (12 oz) Custom Pot Holes

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
excellent buy for the price. November 23, 2015
Reviewer: Jon from Tecumseh, ON Canada  
I have owned this kettle since September 2015.  I have made about 5 batches on it so far using an electric stove for heat on 4 of them and a propane burner on 1.  It has held up quite well so far.  I think the added convenience of not having to worry about rubber seals (as with weldless pots) is well worth the price premium.

my one complaint is that both of the wells (thermometer and spigot) had some sort of small carbon deposits inbetween their threads.   It took about 15 minutes of scrubbing with pbw to clear them. I suspect it was from the manufacturing process.

I will update this review after a year of use.

Was this review helpful to you?