> Brewing Equipment > Pots & Kettles > Pot and Kettle Accessories >

Adjustable Angle Thermometer
Adjustable Angle Bi-metal Thermometer
 
Alternative Views:


Temperature control is critical in brewing beer, without it, it is impossible to brew beers properly. One reason for mediocre beers is due to the lack of temperature control. This often leads to producing off flavours caused by the fusel alcohol and esters produced by the yeast. It can also result in fermentation that is too hot, which makes the yeast become sensitive towards alcohol toxicity. This could cause the yeast to die off due to the slight presence of alcohol.

Fermentation of beer can also encounter problems during winter. Yeasts can show signs of stress on cold condition which include sluggish to no fermentation. It can also lead to the finished product to have a bland taste.

Home brewers have to remember that yeasts prefer a specific range of temperature in order to effectively ferment the wort into beer. It is therefore important to always monitor the ambient temperature of the wort at all times using a thermometer.

Keeping a close eye of the temperature of the brew is very critical in creating consistent beer. This is the reason why home brewers need to invest in a good thermometer to be able to achieve just that.
Price: $45.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Adjustable Angle Thermometer

Features:
  • Adjustable bi-metal thermometer.
  • Features a 1/2" NPT threaded connection.
  • 3 1/4" probe length.
  • 8" total length.
  • Has a 3" dial face connection which can be rotated up or down for convenient viewing.
  • Temperature reading available for both Celsius and Fahrenheit.
  • Temperature graduations from -10 to 100 degrees Celsius (0° to 220° F)

May we also suggest...
Weldless Kit for Thermometer 12" Stainless Steel False Bottom Stainless Steel 3 Piece Ball Valve - 1/2" Female NPT
Price: $6.69

Add
Price: $32.99

Add
Price: $14.49

Add
This kit will allow for a water tight installation in any converted keg or kettle without welds. Just drill a hole at 7"8", then use the parts provided. Parts include 1/2" Stainless Steel NPT Lock Nut, Silicone O-Ring & Stainless Steel 7/8" ID Washer. 12" Diameter Stainless Steel False Bottom 3 Piece Stainless Steel Ball Valves

Average Customer Review: 3 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
bust purchase September 18, 2017
Reviewer: scott from st.johns  
only after a few times I used these the housing on the sides fell off, they are not great quality and I wish I had to purchase other items on the website

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
exceptional build quality December 12, 2014
Reviewer: paul cook from oakville, ON Canada  
this unit should last a lifetime. Superb

Was this review helpful to you?