> Draft Equipment > Carbonating >

Anvil Brewing Equipment Stainless Steel Oxygenation Wand with Regulator
Anvil Brewing Equipment Stainless Steel Oxygenation Wand | 10 Micron Diffusion Stone | Regulator Valve | This high quality oxygenation wand helps provide an optimal environment for yeast and fermentation.
 
Anvil Brewing Equipment's Stainless Steel Oxygenation Wand measures in at 24" in length. It comes equipped with 5' of 1/4"ID tubing, a 10 micron diffusion stone, and a regulator valve for hooking up to an oxygen tank. This high quality oxygenation wand helps provide an optimal environment for yeast and fermentation.
Price: $77.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Anvil Brewing Equipment Stainless Steel Oxygenation Wand with Regulator


Features:
  • 24" High quality stainless steel wand
  • 5' of 1/4"ID Tubing
  • 10 Micron diffusion stone
  • Regulator Valve for oxygen tank attachment
  • CGA 601 connection with left-handed threading

Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
Fast, EZ and Good Results May 18, 2017
Reviewer: Spanky from KW  
I passed on the refillable system after reading in a few forums about the hassles of getting the tanks filled,   The disposable tanks are available everywhere and I was able to get a few on sale for 10 and change.   As a precaution I added and inline filter and I have been satisfied with the results.  I like how quick it is and doesn't leave my wort exposed very long ans less foam than the fish pump.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Decent little product for the price March 21, 2017
Reviewer: Adam Dubeau from Seven Persons, AB Canada  
I bought this and was a little concerned about the regulator, as there's not much information about what it can hook up to. After spending 3 hours in town driving between Praxair, Western Canada Welding, and Acklands-Grainger, I learned from Praxair that this regulator has a CGA 601 fitting. Most refillable oxygen bottles have a CGA 540 fitting.

What I did find out was that these will work great with the DISPOSABLE Bernz-omatic Oxygen tanks. You can find these in Canadian Tire in the Welding/Brazing section. I picked up two bottles for 13.99 each.

For the ultimate oxygenation hack, ditch the oxygenation wand and use the oxygenation system here:

https://www.ontariobeerkegs.com/Stainless_Steel_In_line_Oxygenation_Assembly_p/inline-oxygen-with-barb.htm

I have my setup coming off my plate chiller with quick connects onto a Tee with the oxygen stone and the thermometer. Basically setup like the local brewery does.

Was this review helpful to you?