> Brewing Equipment > Homebrew Bottling >

Auto-Siphon (3/8")
Auto-Siphon (3/8")
 
The 24" Long Quick Start Auto Siphon provides single stroke action to draw a siphon without disturbing sediment and prevents introduction of air at the seal. Great for transferring from carboys and buckets.
Price: $12.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Auto-Siphon (3/8")


Allows wort and beer to be transferred efficiently and easily after cooling and after fermentation. No brewer should be without this device! (Does not include tubing)

May we also suggest...
Clear Hose Tubing 3/8" ID (per foot)
Price: $1.29

Add
Clear Beer Siphon Hose Tubing 3/8"

Average Customer Review: 4 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
A must September 18, 2017
Reviewer: Phylip from Baie-Comeau  
Works and makes your task easy. Been using it and works as new after 30 uses.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
flimsy July 28, 2017
Reviewer: C from N/A  
nice as long as it works - in my case, I got 4 or 5 uses out of it before it stopped working
due to the priming stroke, make sure you have an extra foot or two of tube so you don't pull the end out

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Works good, and it is big May 18, 2017
Reviewer: Brian from Mississauga  
Works good so far, no leaks. It is also huge, so if you're only working with smaller equipment, check out the mini version.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Don't mess around with anything else December 31, 2016
Reviewer: James Wallace from Hamilton, ON Canada  
No shaking, sucking, fussing around, starts your siphon in one pump. Just buy one. Wish I could get a stainless steel one, but they're cheap enough that I buy a new one every year.

Was this review helpful to you?

  6 of 8 people found the following review helpful:
 
Bad seal April 6, 2016
Reviewer: Adam from Burlington, ON Canada  
After using this siphon 3 times I noticed it wasn't working the way it was supposed to work. Upon closer inspection I noticed the seal at the bottom had a hole in it. When I contacted OBK they said there was nothing they could do about it because I purchased it more than 30 days ago. They also said "aeration is a good thing" ... well its not good when bottling. So I contacted the manufacturer fermtech. After asking to see a picture of the issue they agreed it was a manufacturing defect and sent out a replacement seal in the mail.

Was this review helpful to you?