> Brewing Equipment > Pots & Kettles > Pot and Kettle Accessories >

​Blichmann BrewMometer Bi-Metal Adjustable Thermometer - Weldless (Fahrenheit)
Blichmann BrewMometer Bi-Metal Thermometer - Weldless (Adjustable Angle)
 
Alternative Views:


The temperature while brewing the wort affects its final flavour and aroma. Getting a thermometer for the brew kettle is a great way to monitor the temperature of the wort so that it does not boil longer than needed. Too much boiling of the wort can often lead to an extremely bitter taste and strong aroma from the hops.

The Blichmann BrewMometer comes in different models of thermometer. This weldless bi-metal thermometer features a three-inch air-tight sealed face plate. The face plate can easily be adjusted in any orientation. This means that users can point it sideways, down, up or tilted in any direction to easily read the temperature at any angle and/or direction. The temperature reading available is in Fahrenheit only.

This weldless Blichmann thermometer is ideal for brew kettles that do not come with existing fittings. Connectors are not necessary in mounting this thermometer to the pot. All it takes is to drill a hole from outside the kettle for the thermometer stem to fit through.

The thermometer uses a 1/2" UNF connection which requires a 1/2" diameter hole. Included are the required silicone O-ring, washer, and nut which allows home brewers to fix the thermometer firmly on the brew kettle. Using a sandwich of O-rings is necessary to prevent leaks. This also helps prevent the thermometer from wobbling unnecessarily while secured on the pot. When installing the thermometer, make sure that it is not exposed to the heat of the burner.
Price: 93.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Blichmann BrewMometer Bi-Metal Adjustable Thermometer - Weldless (Fahrenheit)



  • Comes with an adjustable 3" face plate

  • Hermetically sealed

  • Can be adjusted in any orientation for easy temperature reading

  • Comes with weldless bulkhead for easy installation to the brew kettle

  • Provide great sealing capabilities as it comes with an O-ring seal

  • The probe uses a 1/2" UNF connection which requires a 1/2" diameter hole to install

  • Made from stainless steel

  • Temperature reading is in Fahrenheit (-10 to 220 F)


Average Customer Review: 4 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
Really nice and good customer service November 3, 2017
Reviewer: C  
Got the thermometer with the Blichmann kettle and thought I wouldn't really need the adjustment feature. Well, I was wrong; it is great seeing it from far away, scale is big and only one scale (F or C) helps as well. I would wish the C scale has the fives better marked. Checked with digital thermometer and it was very accurate.
Only real problem I had: it failed completely during second batch without any obvious reason. Good thing is Blichmann stands behind their products, so I hope the replacement outlives me

Was this review helpful to you?