> Brewing Equipment > BrewZilla & Accessories >

BrewZilla All Grain Brewing System - Neoprene Jacket
RoboJacket - Neoprene Jacket for 35L V3.1 BrewZilla
Alternative Views:

Works best with BrewZilla units made after 2019. This RoboJacket is made out of neoprene and is intended to be used with the 35L V3.1 and V3.1.1 BrewZillas.

It adds insulation to your BrewZilla allowing for a 10% faster heat up time, 50% less heat loss from boiler, and is easy to wash after use.

Please Note: The jacket is designed to accommodate the "Easy Dump" handle on the lower portion of the BrewZilla.
Price: $29.49

Availability: Usually Ships in 24 Hours


RoboJacket - Neoprene Jacket for 35L V3.1 BrewZilla

  • Neoprene material
  • Fits 35L V3.1 BrewZilla made in 2019
  • 15" Height
  • 11 1/2" Inner Diameter
  • 1/4" Thick

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Nice Accessory April 17, 2020
Reviewer: Chris P from Ottawa, Ont  
The neoprene jacket dresses up the Robobrew nicely. It is a tight fit and four hands are needed to put it on, but once in place it fits nice and snug and doesn't move. It certainly cuts the time the Robobrew takes to get up to boil and makes the boil itself run harder. You especially notice it if you boil in a garage or outside. I would purchase it again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
3 of 5 Not bad January 26, 2020
Reviewer: Dave R from Vancouver, BC  
It is a neoprene jacket. As mentioned in the other review fits snug. Mine also was poorly cut, such that the spaces for the dump handle, tap, and pump bracket didn't line up correctly. Not a massive issue as I was still able to close the jacket and keep it on...but it seems like such a simple parameter should be achieved.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Almost Great November 11, 2018
Reviewer: Mike D from Hillsdale, ON Canada  
The jacket looks good and cleans up well.  The improvement it makes to your brew is noticeable in the boil, as it definitely boils a bit harder.  "In Use" function is good.  Where it falls is the closure and size.  First the jacket fits tight.  Like, really tight.  It just barely makes it around.  Which would be fine, if the closure was sturdy, but they use a velcro strip that is great for the first couple open/close uses, but the "fuzz" part of the velcro seems to be "tearing off" really easily.  So with the jacket so tight and a velcro strip that looks like it won't last much past 10 uses, you may end up having to buy your own velcro straps to keep the jacket on.  If you have to buy auxiliary parts to make something this simple (a wet suit with one velcro strap) last more than a few uses, a star is going to be knocked off.  The jacket itself does help though.

Was this review helpful to you?