> Brewing Equipment > BrewZilla & Accessories >

BrewZilla All Grain Brewing System - 35L | V3.1.1
BrewZilla V3.1.1 All Grain Brewing System - 35L
Alternative Views:

New 2021 Model

  • *New and Updated Circuit Board for 2020*
  • Improved Boiler False Bottom provides superior protection against grains getting into the boiler. As a result new models do not come with the Fine Screen
  • The Gen 3.1.1 circuit board is an improvement over the Gen 3.1 circuit board as it won’t start a programmed stage until it hits the set the temperature
  • Uses a camlock that is not compatible with the ones we sell.

Please Note: This model doesn't need the silicon seal at the top of the mash pipe.

Built into the BrewZilla are heating elements (for heating and boiling), a pump (for recirculation), a water-resistant control panel (for settings and monitoring), a removable grain basket, and a built-in spigot (for transferring).

It uses 110v power allowing it to be used almost anywhere. Built to make batches up to 30L, with a total capacity of 35L (9.24 gal).

Looking for an easy way to run water through the immersion chiller?

Simply add the BrewZilla 1/2" Tubing Kit to your cart.

This kit allows you to hook your BrewZilla directly up to a garden hose.
Price: $549.99
Sale Price: $499.99
Save $50.00!

Price with Selected Options: $499.99

Availability: Usually Ships in 24 Hours

Add a Neoprene Jacket?*:

Add a Ratchet Pulley Rope?*:

1 Year Extended Warranty?


2020 Model RoboBrew/Brewzilla V3.1.1 All Grain Brewing System - 35L

The Old 3.1 Model Is Now Discontinued.

  • Stainless Steel Immersion Chiller
  • Digital Backlit Temperature Controller
  • 110v Plug and Power
  • Stainless Steel 1/2" BSP Ball Valve with 1/2" OD barb
  • Magnetic drive pump in the base of the unit
  • Dual Heating Elements (1000w and 500w)
  • Glass Lid
  • Stainless Steel recirculation arm
  • New versions do not come with fine screen
  • This model doesn't need the silicon seal at the top of the mash pipe
  • *New and Updated Circuit Board for 2020*
  • 35L (9.24 gal) Capacity
  • Delay Start Timer
  • Step Mash Functionality
  • Stainless Steel Body
  • Interior Volume Markings
  • Displays temperature in both °C and °F

Everyone should first read the manual before brewing with the BrewZilla for the first time. If you don't have it anymore, you can download it here.

Warranty Information:

At OBK we provide a 1-year warranty for all BrewZilla parts (excluding heating elements). This warranty only covers parts and does not cover replacing the
BrewZilla unit in it's entirety. We carry all warranty parts in house so we will be able to fulfil your replacement needs in a timely manner. Important note, the boilers are thin metal and may have cosmetic surface defects like scratches and dents on the outside during shipping. This is normal.

The lid for these units are designed to be airtight. It is normal to push them in with force and use the clamps to secure in place.

The bottom panel on these units gets bent around 10% of the time while shipping. It is common to need to remove three screws and lightly bend it back. It is a nussance but a quick easy fix.

This unit needs to be cleaned before use or testing to remove manufacturing oils. Failure to clean it first will cause some staining that will need to be removed with
Bar Keepers Friend Cleanser.

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 9 Write a review.

  1 of 1 people found the following review helpful:
3 of 5 Robobrew - after 1 yr October 25, 2020
Reviewer: Geoff from Toronto  
I have had my 35L Brewzilla for 1yr and for the most part, I'm very happy with it. Moving indoors to an all-electric RIMS system beats my previous method of converted Keg and burn plate by a long shot. The Brewzilla is easy to program for step mashing, however, you really need to factor the ramp-up time in the process. I prefer to keep an eye on my brew and manual works great. My only complaint, the built-in pump is terrible! I have had issues with my last 3 session ales (it doesn't like fine grains). I have had to add a Muslim bag to the process and even then, you need to be careful how you set the flow on the pump as this can cause it to stop working. Accessing the pump is a pain in the ass to fix. An exterior pump is the way to go. That aside, it's a very decent system for the $$.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Excellent System April 10, 2020
Reviewer: Richard S. from SW Ontario  
Brewed three batches now, and this system is great. Cut down on brewing time, less to clean, high quality stainless steel, accurate temp control, healthy rolling boil with the jacket, good pumping volume, and the malt pipe system is great. I definitely brew more now because the brew day is easier.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Robobrew December 3, 2019
Reviewer: Christopher Fleming from Bradford, ON Canada  
Great system!  If you are new to brewing just skip the propane/igloo cooler and buy this.  Can brew inside with great control over strike/mash temps.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Best thing I ever bought. December 3, 2019
Reviewer: Vincent p. from Quebec  
Been brewing on propane outside for a few years and even tho the robobrew aint the fastest to reach boil, I cutted down my brew time of at least an hour.

Less hard on the body too, no need to lift heavy pot with 6gallon+ of water from the propane burner outside to the mash tun, and the 7 gallon+ after sparging to the burner outside!

Cleaning is a breeze too.

++Im hitting all my target when brewing wich I never really did before.

Even if your just starting this is the best investment someone can do!

Was this review helpful to you?

  4 of 4 people found the following review helpful:
5 of 5 Awesome system, no regrets March 19, 2019
Reviewer: Court from Toronto  
The Robobrew is a phenomenal unit that makes brewday so easy.  I have a propane based 10gal system as well, but the Robobrew makes 5gal batches an absolute pleasure.  

Not only is the unit great, but the service at OBK is unbelievably awesome.  Their service has made me a loyal customer for all my brewing equipment.

Was this review helpful to you?

View All Customer Reviews