> Brewing Equipment > Burners > Burner Accessories

Burner Accessories


During the process of brewing beer, heating and boiling the liquid can takes up most of your brew day. This is the reason why a home brewer should invest in good burners for their brewing stations. Burners are essential in providing heat to boil or keep the liquid warm during various processes in brewing beer.

When choosing a good burner, it is crucial to opt for those that come with high BTU (British Thermal Unit). This unit refers to the amount of energy needed to raise a pound of water to 1 degree Fahrenheit within an hour. A burner that has 55,000 BTUs is enough to boil 17 gallons of water in an hour provided that all conditions are ideal. This is the reason why it is so essential to select a good burner that can provide adequate heat so that the liquid will boil evenly without causing the sugar within to burn.

While many home brewers rely on their burners to provide heat to boil their liquid, it is important to also maintain the quality and integrity of the burner to keep it working at optimal conditions. This is the reason why replacing worn out parts is necessary.(more info below)
Sort By:
Anvil Brewing Equipment Burner Leg Extensions Bayou Classic High Pressure LPG 0-30 PSI Adjustable Regulator & Hose Assembly replacement for the Banjo Burner. This is a 30 PSI regulator with a burner connection, a tank connection and a valve to control the flow. OBK Canada Homebrew Burner. 48" Stainless Steel Braided Hose
10 PSI Regulator with a Brass Control Valve
3/8" Flare Swivel Fitting This 10 foot hose is a high pressure thermoplastic hose with braided Stainless Steel for durability. 
Maximum 350 PSI use. Can be used with LP gas, outdoor burners, cookers and fryers. 

1/4" MNPT x 3/8" Flare Swivel Brass Connectors
The Bayou Classic 12" Brew Thermometer This hose is great if you want to extend your current PSI hose. 
Thermoplastic hose
1/4" MNPT x 3/8" Flare Swivel Brass Coneectors
350 PSI Maximum use 
8" in Length 1/4" F x 1/4" MNPT add this needle valve to your regulator to control your flame on your propane burner. This Brass Orifice is 1/8" MNPT x 3/8" Flare M. Fits female ends of Bayou Classic's 20 PSI regulators and propane hoses. Converts female ended kits to male kit.
This Bayou Classic High Pressure LPG Hose is perfect to extend your current hose with your PSI regulator.
6' Length
1/4" MNPT x 3/8" Flare Swivel Brass Connectors.
350 PSI Maximum use This 10 PSI Regulator is for propane burners only. Made for 55,000- 85, 000 BTUS
1/4" FNPT 2 Hose Connector, Maximum use 10 PSI, Blister Pack Leg extensions for the Blichmann Floor Burner. Raise the burner to a height sufficient to drain a kettle into a standard six-gallon carboy. Burner sold separately!
   
 
At Ontario Beer Kegs, we provide a great selection of burner accessories that you can choose from. Our burner accessories are compatible with either natural gas or propane burners. We carry parts like thermometers, hoses, regulators, and leg extensions. We also provide complete assemblies for major parts that may require replacement.

Replacing the parts of your burner not only allows you to customize your burner for optimal heat transfer, but it also allows you to ensure the safety of your brewing station. There is nothing more dangerous than boiling wort on a burner with a worn-out regulator.

Browse through our selection of burner accessories and be amazed with the variety of options!