> Brewing Equipment >

Chugger Brew Pump - Inlet Polysulfone Head
Chugger Brew Pump - Inlet Polysulfone Head
 
The Chugger Brew Pump - Inlet Polysulfone Head is designed to provide great performance at a great price. These pumps are designed to provide a robust 7 gpm flow rate with a magnetic drive made to handle back pressure. This Brew Pump makes transferring between kettles easy, and allows you to cool wort via a counterflow chiller. The housing can handle liquids up to 250°F and features a 1/2" Male NPT inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started. DO NOT RUN DRY
Price: 149.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Chugger Brew Pump - Inlet Polysulfone Head


Specifications:
Inlet 1/2"MPT
Outlet 1/2"MPT
Polysulfone (Front Housing), Polysulfone (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon (Impeller)

Max Flow 7 GPM 26.5 LPM
Max Head 18.6 FT 4.1 M
Power .04 HP .029 KW
Electrical 115V 50/60HZ
Non-Submersible
60HZ 50HZ
RPM: 3500
Motor AMP Rating - Full Load Amps (FLA)
Motor Only: 1.7 Amps
Motor and Pump: 1.9 Amps
55" Cord with Plug

Can handle liquids of 250F
Materials are FDA Food Compliant
Components are UL Recognized
DO NOT RUN DRY

Share your knowledge of this product with other customers...
Click here to write a review