> Brewing Equipment >

Chugger Brew Pump MAX - Center Inlet Polysulfone Head
Chugger Brew Pump MAX - Center Inlet Polysulfone Head
 
The Chugger Brew Pump MAX - Center Inlet Polysulfone Head is designed with serious homebrewers in mind. This pump is targeted towards larger brewing systems (30+ gallons) and can move hot wort with ease. These pumps are designed to maximize flow rates while being relatively economical compared to standard commercial pumps. The housing can handle liquids up to 250°F and features a 1" Female NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started.

DO NOT RUN DRY
Price: $304.49

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Chugger Brew Pump MAX - Center Inlet Polysulfone Head


Specifications:
  • Inlet 1" FPT Outlet 1/2"MPT
  • Polysulfone (Front Housing)
  • 316 Stainless Steel (Rear Housing)
  • Teflon (Thrust Washer)
  • CLEAR Silicone (O-Ring)
  • Ryton/Teflon (Impeller)
  • Max Flow 17 GPM 64.4 LPM
  • Max Head 27 FT 8.2 M
  • Power .125 HP .093 KW
  • Electrical 115V 50/60HZ
  • Non-Submersible
  • 60HZ 50HZ
  • RPM: 3500
  • Fan Cooled Motor
  • Motor AMP Rating - Full Load Amps (FLA)
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • 55" Cord with Plug
  • Chugger Max contains sealed bearings. No oil necessary.
  • Can handle liquids of 250F
  • Materials are FDA Food Compliant
  • Components are UL Recognized
DO NOT RUN DRY

Share your knowledge of this product with other customers...
Click here to write a review