The Chugger Brew Pump MAX - Center Inlet Stainless Steel Head is designed with serious homebrewers in mind. This pump is targeted towards larger brewing systems (30+ gallons) and can move hot wort with ease. These pumps are designed to maximize flow rates while being relatively economical compared to standard commercial pumps. The housing can handle liquids up to 250°F and features a 1" Female NPT center inlet, and a 1/2" Male NPT output.
When operating the pump, please note that the inlet should never be restricted, only the outlet.
Please Note: The pump head and lines need to be full before the pump is started.
DO NOT RUN DRY
Usually Ships in 24 Hours