> Brewing Equipment >

Chugger Brew Pump MINI MAX - Center Inlet Stainless Steel Head 115/230VAC
Chugger Brew Pump MINI MAX - Center Inlet Stainless Steel Head 115/230VAC
 
The Chugger Brew Pump MINI MAX - Center Inlet Stainless Steel Head is designed to be a step up from the starter chugger pump providing many of the advantages of the MAX series chugger pump. This pump has the same flow rates as a standard chugger pump while providing 3X the HP allowing it to move hot wort far faster and easier. The housing can handle liquids up to 250°F and features a 3/4" Male NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started. DO NOT RUN DRY
Price: 265.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Chugger Brew Pump MINI MAX - Center Inlet Stainless Steel Head 115/230VAC


Specifications:
  • Inlet 3/4" MPT Outlet 1/2"MPT
  • 316 Stainless Steel (Front Housing)
  • 316 Stainless Steel (Rear Housing)
  • Teflon (Thrust Washer)
  • CLEAR Silicone (O-Ring)
  • Ryton/Teflon (Impeller)
  • Max Flow 7 GPM 22.7 LPM
  • Max Head 18.6 FT 4.1 M
  • Power .125 HP .093 KW
  • Electrical 115V & 230V
  • Non-Submersible
  • 60HZ 50HZ
  • RPM: 3500
  • Fan Cooled Motor
  • Motor AMP Rating - Full Load Amps (FLA)
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • 55" Cord (NO PLUG, ELECTRICAL KNOWLEDGE REQUIRED TO INSTALL)
  • Chugger Max contains sealed bearings. No oil necessary.
  • Can handle liquids of 250F
  • Materials are FDA Food Compliant
  • Components are UL Recognized

DO NOT RUN DRY

Share your knowledge of this product with other customers...
Click here to write a review