> Brewing Equipment >

Chugger Brew Pump MINI MAX - Inline Stainless Steel Head 115/230VAC
Inline Stainless Steel Head 115/230VAC - Chugger Brew Pump MINI MAX
 
The Chugger Brew Pump MINI MAX - Inline Stainless Steel Head is designed to be a step up from the starter chugger pump providing many of the advantages of the MAX series chugger pump. This pump has the same flow rates as a standard chugger pump while providing 3X the HP allowing it to move hot wort far faster and easier. The housing can handle liquids up to 250°F and features a 1/2" Male NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started. DO NOT RUN DRY
Price: 259.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Chugger Brew Pump MINI MAX - Inline Stainless Steel Head 115/230VAC


Specifications:
  • Inlet 1/2" MPT Outlet 1/2"MPT
  • 316 Stainless Steel (Front Housing)
  • 316 Stainless Steel (Rear Housing)
  • Teflon (Thrust Washer)
  • CLEAR Silicone (O-Ring)
  • Ryton/Teflon (Impeller)
  • Max Flow 7 GPM 22.7 LPM
  • Max Head 18.6 FT 4.1 M
  • Power .125 HP .093 KW
  • Electrical 115V & 230V
  • Non-Submersible
  • 60HZ 50HZ
  • RPM: 3500
  • Fan Cooled Motor
  • Motor AMP Rating - Full Load Amps (FLA)
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • 55" Cord (NO PLUG, ELECTRICAL KNOWLEDGE REQUIRED TO INSTALL)
  • Chugger Max contains sealed bearings.
  • No oil necessary

Can handle liquids of 250F
Materials are FDA Food Compliant
Components are UL Recognized

DO NOT RUN DRY

Share your knowledge of this product with other customers...
Click here to write a review