> Brewing Equipment >

Chugger Nano Brewery Pump MAX - Center Inlet Stainless Steel Head 115/230VAC
Center Inlet Stainless Steel Head 115/230VAC - Chugger Nano Brewery Pump MAX
 
The Chugger Nano Brewery Pump MAX - Center Inlet Stainless Steel Head 115/230VAC is designed with serious homebrewers in mind. This pump is targeted towards larger brewing systems (30+ gallons) and can move hot wort with ease. These pumps are designed to maximize flow rates while being relatively economical compared to standard commercial pumps. The housing can handle liquids up to 250°F and features a 1" Female NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started. DO NOT RUN DRY
Price: $429.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Chugger Nano Brewery Pump MAX - Center Inlet Stainless Steel Head 115/230VAC


Specifications:
  • Inlet 1" FPT Outlet 1/2"MPT
  • 316 Stainless Steel (Front Housing)
  • 316 Stainless Steel (Rear Housing)
  • Teflon (Thrust Washer)
  • CLEAR Silicone (O-Ring)
  • Ryton/Teflon (Impeller)
  • Max Flow 17 GPM 64.4 LPM
  • Max Head 27 FT 8.2 M
  • Power .125 HP .093 KW
  • Electrical 115V & 230V
  • Non-Submersible
  • 60HZ 50HZ
  • RPM: 3500
  • Fan Cooled Motor
  • Motor AMP Rating - Full Load Amps (FLA)
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • 55" Cord with Plug
  • Chugger Max contains sealed bearings - no oil necessary

Can handle liquids of 250F
Materials are FDA Food Compliant
Components are UL Recognized

DO NOT RUN DRY

Share your knowledge of this product with other customers...
Click here to write a review