> Brewing Equipment >

Chugger Brew Pump - Center Inlet Stainless Steel Head
Center Inlet Chugger Brew Pump
 
Stainless Steel Head with 3/4" Center Inlet Chugger Brew Pump. Move hot wort with ease, featuring a 3/4" Male NPT center inlet, 180° opposite a 1/2" Male NPT output. Threading is NPT and the housing can handle liquids up to 250°F. The durable stainless means you'll never have to worry about cracking the pump head when tightening your fittings. When operating the pump, please note that the inlet should never be restricted, only the outlet. This product has the option of adding a Stainless Steel 3/4" to 1/2" female to female reducing coupler to allow you to connect with other 1/2" NPT connections within your personal brewery.
Price: 194.99


Availability: Usually Ships in 24 Hours

Add Reducing Coupler

Not required.
Add 3/4" x 1/2" (FPT) SS Reducing Coupler. [Add 5.99]

Quantity:  
Features
 

Chugger Brew Pump - Center Inlet Stainless Steel Head

Specifications:
  • Chugger SS Center
  • 3/4" NPT Inlet
  • 1/2" NPT Outlet
  • 316 Stainless Steel Front Housing
  • 316 Stainless Steel Rear Housing
  • Teflon Thrust Washer
  • CLEAR Silicone O-Ring
  • Polysulfone Impeller
  • Max Flow 7 GPM 22.7 LP
  • Max Head 18.6 FT 4.1M
  • Electrical 115V 50/60HZ
  • Non-Submersible
  • 60HZ 50HZ
  • Can handle liquids of 250°F
  • Materials are FDA Food Compliant
  • Components are UL Recognized

DO NOT RUN DRY


May we also suggest...
Stainless Steel Camlock Type F - Male Camlock x 1/2" Male NPT Stainless Steel Camlock Type A - Male Camlock x 1/2" Female NPT Stainless Steel 3 Piece Ball Valve - 1/2" Female NPT Silicone Hose 1/2" ID (per foot)
Price: 4.99

Add
Price: 4.99

Add
Price: 18.99

Add
Price: 2.79

Add
Stainless Steel Type F Camlock - 1/2" Male Camlock x 1/2" Male NPT Stainless Steel Type A Camlock - 1/2" Male Camlock Connector x 1/2" Female NPT. Commonly attached to pumps, plate chillers, and stationary brewing equipment. Compatible with Type B, C, D. - Quick Disconnects and Brewer's Hardware Canada OBK Online Supply 3 Piece Stainless Steel Ball Valve Silicone Hose (1/2" ID, 3/4" OD)

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  4 of 5 people found the following review helpful:
 
Fantastic pump at a ridiculous price July 4, 2014
Reviewer: David O'Horan from Vernon, ON Canada  
Even at its current price of $159.99, this is a steal, but when I got it for the DotD price of $139.99, I couldn't have been happier.

If you've had priming issues with other pumps in the past, the center inlet SS chugger is the answer. Essential for a single tier system and/or a HERMS or RIMS setup.

Was this review helpful to you?