> Brewing Equipment >

Chugger Brew Pump - Inline Stainless Steel Head
Chugger Stainless steel inline brew pump.
 
This Chugger Stainless Steel inline pump allows you to move hot wort with ease. The durable housing means you never have to worry about cracking the pump head when tightening your fittings. All the materials are FDA food compliant and the components are UL Recognized. This is the inline version where the inlet and outlet are 180° opposed to each other.  This pump can handle liquids up to 250°F, the inlet and outlet are both 1/2" male NPT and please note that you should never restrict the inlet of the pump, only the outlet.
Price: $189.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Chugger Brew Pump - Inline Stainless Steel Head

Specifications:
  • Inlet 1/2" MPT Outlet 1/2"MPT
  • Stainless Steel (Front Housing), Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Polysulfone (FDA) (Impeller)
  • Max Flow 7 GPM 22.7 LPM
  • Max Head 18.6 FT 4.1 M
  • Power .04 HP .029 KW
  • Electrical 115V 50/60HZ
  • Max Flow 7 GPM 22.7 LPM
  • Max Head 18.6 FT 4.1 M
  • Power .04 HP .029 KW
  • Can handle liquids of 250F
  • Materials are FDA Food Compliant
  • Components are UL Recognized
DO NOT RUN DRY

Average Customer Review: 4.5 of 5 Total Reviews: 6 Write a review.

  1 of 1 people found the following review helpful:
 
Great Pump! October 23, 2016
Reviewer: Jarrod Connolly from Richmond, BC Canada  
This is a great little pump. I use it for hot water only since I have a two tier system and gravity feed wort back down. It primes easily and have had no trouble with it. I agree with the other review that some sort of switch would be nice but I am also using a power bar which works great.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Could use a switch May 28, 2015
Reviewer: Chris from Kitchener, ON Canada  
I used this for the first time last weekend. A very good pump indeed. I only wish it had an on/off switch so that I could turn it off with one hand. I will have to plug it into a power bar or something.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Priming issues chugger pump October 31, 2014
Reviewer: Blair Madden from Barrie, ON Canada  
Purchased this pump and works ok, but priming issues are  pain in the wort.
Wish it just worked when plugged in but needs to be tweaked with when pumping, so that means spilling wort.
Wish I got the center tap pump.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice pump September 3, 2014
Reviewer: Justin A. from Guelph, ON  
Solid pump. Only things that could be improved would be having an area near the threads that you could put a wrench on to help you tighten fittings to the pump. May be designed like this to prevent over tightening - not sure. Secondly, the mounting holes are not easily accessed because the motor is in the way. You may find you need to make your own bracket for the pump or perhaps use a small rachet with shallow socket and self-taping bolts to mount. The pump is fairly quite and does create some heat so make sure it is well ventilated.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Buy this pump! May 12, 2014
Reviewer: Sam Larkman from Bracebridge, ON Canada  
After seeing many of the same pump online at a higher price, I chose this one.  So glad I did.  I use it for Wort re-circulation in my BIAB single vessel system, and this handles the task brilliantly!  So happy with this pump!

Was this review helpful to you?

View All Customer Reviews