> Brewing Equipment >

New!  Circular Round Hole Punch, Knockout Die - 32mm
Circular Round Hole Punch, Knockout Die - 32mm
 
The 32mm Circular Round Hole Punch, Knockout Die is perfect for making clean burr free holes on your kettle.

To use properly a step drill bit is required for drilling the pilot hole.

The hole punch works great with stainless steel up to 1.5mm thick and cuts a clean perfect hole. The hole that is drilled is roughly 1 1/4" in diameter which is the perfect size for installing a heating element.

Please Note: If you choose to drill a hole into your equipment it is your responsibility, Ontario Beer Kegs will NOT replace or accept returns on kettles, brew buckets, or chronicals that you yourself have damaged.
Price: $14.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Circular Round Hole Punch, Knockout Die - 32mm


Specifications:
  • 32mm round hole punch
  • Can be used with stainless steel up to 1.5mm thick
  • Can be used with sheet steel up to 3mm thick

Ideal for:
  • Perfect sized hole to install a heating element.
Instructions
  • Using your stepped drill bit drill a pilot hole into your kettle/vessel
  • Insert bolt into the pilot hole
  • Attach the die and punch portions together
  • Use ring spanner to tighten bolt
  • Keep tightening the bolt until you hear the click sound of the punch passing through the steel
  • Remove the assembly from the hole and screw the die and punch portions apart
  • Remove and throw away the cut out steel

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Worked great! August 8, 2019
Reviewer: Mike from ON Canada  
I used it to punch 2 holes in a stainless kettle. It was quick and easy.

Was this review helpful to you?