> Draft Equipment > Kegging & Dispensing >

Dual Cobra - Basic Kit (Sanke S Couplers)
Dual Cobra - Basic Kit for Commercial Sanke Kegs
 
For those who want to buy kegs from the beer store. "S" system is used by many European breweries, also known as European Sankey. Kit includes everything needed to dispense from a Picnic tap.

*New (empty) Aluminum CO2 Tank is Optional
Price: 244.99


Availability: Usually Ships in 24 Hours

CO2 Tank Options

No tank required.
5 Lb CO2 Tank [Add 84.99]
Regulator

Dual Gauge Regulator (Poly Bonnet)
Upgrade to Dual Product Regulator (Poly) [Add 70.00]
Upgrade to Dual Product Regulator (Zinc) [Add 80.00]

Quantity:  
Features
 

Dual Cobra - Basic Kit (Sanke S Couplers)


Kit Includes:

  • Taprite Dual Gauge Regulator & Two Way Manifold Gas Distributor (with Check Valves)

  • 6' of Bevlex 200 Beer Line for each tap & 4' of Ultraflex Gas Tubing for each gas outlet & inlet

  • 2x Cobra Tap (Picnic Faucet)

  • 2x Sanke "S" Coupler

  • Stainless Steel Hose Clamps
Additional Features
  • Premium Taprite T742HP-02 regulator. Approved for use by all major breweries. It has a new adjustment system that allows pressure to be easily adjusted by hand (no tools required!). Shutoff Valve is ball type check valve that prevents product back-up into regulator. Solid brass body with extra long nipple. Regulator has "Shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed. Heavy duty UL rated dual gauges. LH threaded ports with CGA 320 shank and nut.
  • Optional CO2 Tank. Manufactured recently these will not need to be retested for five years. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.
  • American 'D" couplers. This is the coupler you want for kegs from the beer store. This couplers comes with a 5/16th hose barb for your gas line. Liquid barb is not included. Currently only a back handle is available.
  • Two way manifold comes with 1/4"" OD inlet (to ft 5/16" gas hose) with two 5/16" OD outlets. Each outlet valve has a built in check valve to protect from harmful back flow damaging your equipment -Fits 1/4" ID hose by heating the hose to make it supple. -Fits 5/16" ID Hose. -Will fit 3/8" Hose if clamp tightly.

Share your knowledge of this product with other customers...
Click here to write a review