> Draft Equipment >

Dual Cobra Tap - Complete Kit (with Ball Lock Cornelius Kegs)
Dual Cobra Tap - Complete Kit (with Ball Lock Cornelius Kegs)
 
Dual cobra dispensing kit. This system comes with ball lock kegs with pressure relief valves. Ball lock kegs are easy to maintain because they still make them. Assembly is easy. The picnic faucets are already done. Just need to attach the included gas lines with the included clamps to the regulator and manifold with a screwdriver.

Dual Product or Dual Gauge regulator? The Dual Product regulator is for two separate pressures from one Co2 tank. If you plan to force carbonate at a higher pressure or drink a style with a higher or lower carbonation level then it makes a great choice.

*New (Empty) Luxfer Aluminum CO2 Tank is Optional


Additional Stainless Steel Swivel Nut - 5/16" Barb and Flare Fitting Washer 1/4" are meant for use with the optional dual product regulators.
Price: 259.99


Availability: Usually Ships in 24 Hours

CO2 Tank Options

No tank required.
5 Lb CO2 Tank [Add 84.99]
10 Lb CO2 Tank [Add 144.99]
10 Lb CO2 Tank with Handle [Add 147.99]
Regulator

Dual Gauge Regulator (Poly Bonnet)
Upgrade to Dual Product Regulator (Poly) [Add 70.00]
Upgrade to Dual Product Regulator (Zinc) [Add 80.00]
Bevlex Beer Line Length:



Quantity:  
Features
 

Dual Cobra Tap - Complete Kit (with Ball Lock Cornelius Kegs)

Kit includes:
  • Taprite High Performance Primary Dual Gauge Regulator
  • 2 Way Gas Manifold with Check Valves
  • 6' of Bevlex 200 Beer Line (Thick wall 3/16" ID X 7/16" OD) for each tap
  • 4' of Ultraflex Gas Tubing (5/16" ID x 9/16" OD) for each gas connection
  • CMBecker Ball Lock MFL Threaded Gas & Beverage Disconnects
  • Stainless Steel Swivel Nuts (1/4" Barb for Beverage, 5/16" Barb for Gas)
  • 2 Cobra Taps (Picnic Faucets)
  • Stainless Steel Hose Clamps
  • Two Pressure Tested 5 Gallon Ball Lock Cornelius Kegs (with Pressure Relief Valve)

May we also suggest...
5 Gallon New Cornelius Ball Lock Keg (AMCYL) Keg Lube 4 Pack! Four Complete Sets of O-Rings (Ball Lock)
Sale Price: 109.99

Add
Price: 5.49

Add
Price: 12.99

Add
Brand New Stainless Steel 5 Gallon Ball Lock Soda Keg with Pressure Relief Valve in Lid Keg Lube Ball lock four pack o-ring sets

Average Customer Review: 4 of 5 Total Reviews: 11 Write a review.

  0 of 0 people found the following review helpful:
 
Missing some love July 28, 2017
Reviewer: Marc-Antoine from MontrĂ©al  
The package came really fast and got everything as expected, but the kegs could've been in a better shape. One is in decent shape, the other one seems to have been used for WWII!. Also, don't be surprised if they come dirty as shit. Would've got new kegs instead.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Decent value, some issues December 22, 2014
Reviewer: Jordan from Hamilton, ON  
Good: My kegs are in good shape and hold pressure, the gas lines were all easy to install and didn't leak

Bad: No instructions or details about setup at all. Most of it was pretty self-explanatory, but my package was missing the flared nylon washer for the gas out connection on the regulator. I only found this out by doing a leak test and doing research once I found the leak. I emailed OBK and they just said the washer should have been taped to the regulator box (which it wasn't) and didn't offer any help beyond that. I went to my LHBS to get the washer that weekend, so I had to wait a few days.

The regulator also I different than pictured. It has a screw for adjusting, not a dial. It's a pain to adjust the pressure with a screwdriver when the tank is in my minifridge behind two kegs.

Overall, there are no defects and I'm pretty happy with the setup now that I've gotten it running, which took a bit of troubleshooting myself. Customer service could have been better.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Impressed, but also unimpressed November 29, 2014
Reviewer: Colin Sell from Ottawa  
The good:
The system arrived quickly and the kegs are in pretty good shape. Everything I needed to get started was included.

The bad:
All three gas lines leaked where they were factory clamped.  Lacking the specialty tool (oetiker wrench)to remove and tighten them, I'll need to replace all three. The pressure relief valve on one of the kegs is very finicky and may need replacing. Discovering the problems while I was trying to keg my first batch was very disappointing

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
For the price its good June 4, 2014
Reviewer: Brandon Ricker from Kitchener, Ontario  
Fast shipping straight to my door in 2 days, tanks where in really good shape, just needs a quick cleaning before use,... got the co2 tank fill and hooked everything up and retighten some lines, noticed one of the in gas hoses wasn't tighten properly, one of the parts that are pre assembled together before shipped so I can't tighten down, besides that one thing it's awesome and we'll worth the currency, cheers

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
a steal and fast April 18, 2014
Reviewer: brandon from kitchener, ontario  
odered it and under 48 hours at my door, kegs are good and had some co2 in them so i know they dont have a leak, cobra hoses are a good length none of that bs 4' line, loking forward to hooking up

Was this review helpful to you?

View All Customer Reviews