> Draft Equipment > Kegging & Dispensing >

Dual Tap Kegerator Kit (Sanke S Couplers)
Dual Tap Kegerator Kit (Sanke S Couplers)
Everything but the beer and fridge. This kit is designed to have all the parts you need to put two faucets through a fridge door or small wall and dispense beer. "S" system is used by many European breweries, also known as European Sankey.

*New (empty) Aluminum CO2 Tank is Optional

Price: $309.99

Price with Selected Options: $309.99

Availability: Usually Ships in 24 Hours

CO2 Tank Options

No tank required.
5 Lb CO2 Tank [Add $79.99]
10 Lb CO2 Tank [Add $144.99]
10 Lb CO2 Tank with Handle [Add $147.99]

Primary 2P Regulator (Poly) [T742-2]
Micromatic PR. 2P Regulator (Prem.) [642-2] [Add $25.00]
Micromatic PR. 2P Regulator [842-2] [Add $10.00]
Dual Primary 2P Regulator (Poly) [T752HP-02] [Add $70.00]
Dual Primary 2P Regulator (Zinc) [752HP-02] [Add $80.00]
Choose Your Faucet

Choose Your Second Faucet

Choose Your Drip Tray

No drip tray required.
6"x4"x1" Wall Mount SS Drip Tray [Add $26.99]
Bevlex Beer Line Length:

Add a Faucet Wrench

Not required.
Yes, add a wrench [Add $9.99]


Dual Tap Kegerator Kit (Sanke S Couplers)

Kit Includes:

  • Taprite High Performance Dual Product Dual Gauge Regulator

  • 2x Sanke "S" Couplers

  • 6' of Bevlex 200 Beer Line for each tap & 4' of Ultraflex Gas Tubing for each gas outlet & inlet

  • 2x Chrome Plated Faucet (with Tap Handle) + 4 1/8" Chrome Plated Beer Shank (with Tail Piece Assembly)

  • Stainless Steel Hose Clamps

Additional Features
  • Two way manifold comes with 1/4"" OD inlet (to ft 5/16" gas hose) with two 5/16" OD outlets. Each outlet valve has a built in check valve to protect from harmful back flow damaging your equipment -Fits 1/4" ID hose by heating the hose to make it supple. -Fits 5/16" ID Hose. -Will fit 3/8" Hose if clamp tightly.
  • Premium Taprite T742HP-02 regulator. Approved for use by all major breweries. It has a new adjustment system that allows pressure to be easily adjusted by hand (no tools required!). Shutoff Valve is ball type check valve that prevents product back-up into regulator. Solid brass body with extra long nipple. Regulator has "Shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed. Heavy duty UL rated dual gauges. LH threaded ports with CGA 320 shank and nut.
  • Optional CO2 Tank. Manufactured recently these will not need to be retested for five years. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.

Share your knowledge of this product with other customers...
Click here to write a review