> Draft Equipment >

Four Cobra - Basic Kit (Ball Lock Cornelius)
Four Cobra - Basic Kit (Ball Lock Cornelius)
 
Four Cobra Tap (Picnic Faucet) Kegerator Conversion Kit. Sometimes three types of beer on tap just aren't enough variety to cover all the bases you want. By the time you have a house brew, a seasonal, something light, there just isn't enough room for the something dark. Not a problem when you have 4 cobra taps.

*New (Empty) Luxfer Aluminum CO2 Tank is Optional

Additional Stainless Steel Swivel Nut - 5/16" Barb and Flare Fitting Washer 1/4" are meant for use with the optional dual product regulators.
Price: $239.99

Price with Selected Options: $239.99

Availability: Usually Ships in 24 Hours

CO2 Tank Options


Regulator


Bevlex Beer Line Length



Quantity:
Features
 

Four Cobra - Basic Kit (Ball Lock Cornelius)

Kit Includes:
  • Taprite High Performance Primary Dual Gauge Regulator
  • 4 Way Gas Manifold with Check Valves
  • 6' of Bevlex 200 Beer Line (Thick wall 3/16" ID X 7/16" OD) for each tap
  • 4' of Ultraflex Gas Tubing (5/16" ID x 9/16" OD) for each gas connection
  • Ball Lock MFL Threaded Gas & Beverage CMBecker Disconnects
  • Stainless Steel Swivel Nuts (1/4" Barb for Beverage, 5/16" Barb for Gas)
  • 4x Cobra Tap (Picnic Faucet)
  • Stainless Steel Hose Clamps

May we also suggest...
New Cornelius Ball Lock Keg With Single Handle (AMCYL) - 3 Gallon New Cornelius Ball Lock Keg With Single Handle (AMCYL) - 5 Gallon New Cornelius Ball Lock Keg With Single Handle (AMCYL) - 5 Gallon (4 Pack)
Sale Price: $104.99

Add
Price: $109.99

Add
Price: $399.49

Add
Brand New Stainless Steel 3 Gallon Ball Lock Soda Keg with Pressure Relief Valve in Lid. OntarioBeerKegs OBK Draft Dispensing Parts and Accessories Canada. Kegging Homebrew Kegs and more online. Canada Brand New Stainless Steel 5 Gallon Ball Lock Soda Keg with Pressure Relief Valve in Lid Brand New Stainless Steel 5 Gallon Ball Lock Soda Keg with Pressure Relief Valve

Average Customer Review: 2 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Beer lines are too short January 11, 2015
Reviewer: Maurice Thompson from Keswick, ON Canada  
The kit I received was as described. However, you should be aware that the beer lines provided may not be long enough. I Had my PSI set to 14 to carb and pour my lager at 5 degrees C. This resulted in a pour that was way too fast and foamy. I would need about 10-12 feet of line to balance my system.

Was this review helpful to you?