> Brewing Equipment >

Heating Element Cover Cap With Strain Relief
Heating Element Cover Cap with Strain Relief
Heating Element Cover Cap with Strain Relief

This unique cover cap is specifically made to allow the attachment of wiring to your Heating Element and Adapter. This cover cap is designed to allow strain relief, working to ensure your wiring is able to move without cracking or getting damaged.

Constricts from 9/16" Diameter to 1/4" Diameter

Uses PG16 threading for installation.

This cover cap is for use with the Heating Element Adapter - 1.5" Tri Clover x 1" NPS
Price: $4.89

Availability: Usually Ships in 24 Hours


Heating Element Cover Cap with Strain Relief

When you add an element it must be wired by a qualified electrician, enclosed in a watertight enclosure and protected with a GFCI circuit breaker! Improper wiring and/or control of a heater element can KILL YOU! If you have any doubt, please return it for a full refund.

Average Customer Review: Average Customer Review: 2 of 5 2 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
2 of 5 Poorly Sized March 6, 2020
Reviewer: Ian Cudmore from Victoria, BC  
I got one of these with my RIMS tube and element adapter. those are great. The threads on this though are too short to be able to do up the nut through the stainless of the cover without removing the gasket. I dont know about you but that doesn't seem to fit with ensuring you have a water tight enclosure. There is even a warning to that efect on the item. I ended up   taking the gasket out and running a bead of silicone into the threads. I am confident it'll work fine, but thats not really what i thought i was getting when I ordered this

Was this review helpful to you?