Made In Canada

A premium immersion chiller made with 25 feet of 3/8" OD, 304 stainless steel. This gorgeous unit is designed to chill five gallons of hot wort in as little as ten minutes, but is capable of cooling larger batches as well.

Whether you're brewing with extract or all-grain, bringing down the temperature of the wort quickly in order to pitch the yeast is an essential step in homebrewing. Lowering the temperature quickly reduces chances of contaminating your beer with wild yeasts and bacteria, and will reduce the levels of DMS (dimethyl sulfide) that can ruin a beer's aroma. A quick chilling of the wort will also improve clarity in the final product.

The Stainless Steel Wort Chillers are more durable and hygienic products compared to the copper variety due to being made of 3/8" 304 Stainless Steel. The resiliency that these wort chillers provide is unmatched, giving you both an incredibly strong and long lasting wort chiller. The hygienic properties of stainless steel outmatch traditional copper, in addition Stainless Steel is a far easier to clean metal.

When using an immersion chiller there's no unnecessary transferring to different containers, and there's no need to dilute the wort with cold water. Just drop the immersion chiller in to the brew pot. The preferred method of sanitation is to make sure it is clean to the eye and submerge the coil portion of the chiller into the wort during the last 15 minutes of the boil, this will kill any wild yeasts or unsanitary pests that might be introduced. Once the brew pot is taken off the boil, you can begin cooling immediately by hooking up the line and turning on the water.

Price: $72.99

Availability: Usually Ships in 24 Hours

Quantity:

Features

Horned Viper Stainless Steel Immersion Wort Chiller - 25' x 3/8" with Vinyl Tubing

Assembly is Required.
Includes:

(1) 8' length of clear vinyl tubing (hose ships as one piece allowing you to cut to your desired length)
(3) strong Stainless Steel Hose Clamp
(1) 3/8" heavy duty female swivel garden hose fitting
(1) instructions

Chiller Specifications:

8 3/4" coil outside diameter
4 1/2" coil height
14 1/4" inlet/outlet height
18 3/4" Total Height
Covers Surface Area of 353.43"
Tubing Thickness: 0.5mm
304 Stainless Steel

Average Customer Review: Average Customer Review: 5 of 5

5 of 5 Total Reviews: 1 Write a review.

0 of 0 people found the following review helpful:

Blown away.	August 12, 2017
Reviewer: Scott from Winnipeg

I was looking at a copper chiller but the staff at OBK said this one would be durable and work well. They were not kidding. First off this thing got my beer from 215f to 80f in about 20 minutes but I was out in the sun on a 30 degree day. I don't think my hose water was ice cold. The last 10 degrees took a bit but nothing compared to my hour or longer ice baths. I should have gone with the 50 as it doesn't displace as much as I was expecting it to. Even in a 5 gallon batch I could EASILY use a 50. 1/2 inch seems like it would be a worthwhile upgrade also. I suppose when I order a bigger brewpot I can upgrade the rest of my system haha.

Was this review helpful to you?