> Brewing Equipment >

Inline Chugger Pump Kit (Camlock)
Inline Chugger Pump Kit with Camlock Connections
 
This kit makes it simple, and includes all the parts necessary, to pump liquids from one vessel to another. Connecting this system to your home brewery will allow for gravity draining and transferring to wherever you need it to go. Camlock connections makes it quick easy to connect and disconnect hoses as needed.

Stainless Steel Inline Chugger Pump: A pump that moves liquid around with ease, whether it be hot wort from mash tun to brew kettle or re-circulating through a plate chiller and back through a whirlpool arm. All materials are FDA food compliant and the components are UL recognized. The inline version features 180° opposite inlets and outlets. Can handle liquids of up to 250°F. Inlet and outlet connections are 1/2" Male NPT.

Configuration: This is the order from starting point to finishing point in which the liquid will travel through the system. (All fittings are Stainless Steel)

Camlock A or F (Option for Vessel) > Camlock C > 5' of 1/2" ID Silicone Hose > Camlock A > Inline Chugger Pump > 3 Piece Ball Valve > Camlock F > Camlock C > 5' of 1/2" ID Silicone Hose > Camlock C > Camlock A or F (Option for Vessel)

Vessel Connection Options: Two Camlock vessel connections are included with this kit. These options are dependent on the setup of your own system and whether the threading on your vessels are male, female, or one of each. Most common will be two "F" Camlocks as pumps are typically connected between female ball valves. Or often times "A" Camlocks are fitted to plate chiller input/output. But your system may be different. Map it out with your own parts before selecting.





Note: Chugger pumps are not self priming. First the pump head must be flooded with liquid prior to turning on the the pump. If the pump begins making loud noises or squeels, shut it down and make sure the head is full of liquid. To regulate the flow rate of the pump, it must always be on the output side of the pump (as shown in pictures). Use teflon tape on all threaded connections.

Additional Pictures:



Price: 296.99

Availability: Usually Ships in 24 Hours

Choose Vessel Connection 1 (Out)

"F" Camlock
"A" Camlock
Choose Vessel Connection 2 (In)

"F" Camlock
"A" Camlock

Quantity:  
Features
 

Inline Chugger Pump Kit (Camlock)

Parts Included:
  • Chugger Pump with Inline Stainless Steel Head
  • 4 "C" Camlocks
  • 10' of 1/2" ID Silicone Hose (2 x 5')
  • 1 "A" Camlock
  • 3 Piece Ball Valve
  • 1 "F" Camlock
  • (Choice of additional: 2 "F" Camlocks, 2 "A" Camlocks or 1 each "A" & "F" Camlocks)
*All Female Camlocks include Silicone Gaskets.

May we also suggest...
Stainless Steel Street Elbow - 1/2" Male NPT x 1/2" Female NPT Stainless Steel Weldless Whirlpool Arm Assembly (1/2" Flow) Teflon Tape
Price: 4.49
Price: 49.99
Price: 1.75
This is a 1/2" 304SS Street Elbow. Male and Female 1/2" NPT ends. Home brew hardware The OBK Weldless Stainless Steel Whirlpool Arm with 1/2" Flow. Are you looking for clearer wort, quick chilling times and higher hop utilization during flame-out? This can all be achieved with the addition of a whirlpool arm on your brew kettle. OBK Teflon Tape (aka Plumber's Tape) is used to wrap around your threaded brass or stainless steel connections. This will provide a tight seal and prevent leaking. Canada Supplies for Stainless Steel Hardware, Parts, Fittings and Connections

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Great Pump Starter Kit June 13, 2014
Reviewer: Jason Clarke from St Marys Ontario  
I was nervous about moving to a pump system but this kit is a great way to break into some more advance brewing. It is a snap to use, comes with everything you need including the great camlocks and plenty of hose. Also nice and quiet on the ears during those long brew days.

Was this review helpful to you?