> Draft Equipment >

Intertap Growler Filler
Intertap Growler Filler Spout
 
Alternative Views:


Intertap Growler Filler

This Growler Filler includes an Intertap Growler Filler Spout, as well as 1' of 1/2" clear plastic tubing.

The Growler Filler Spout has a 1/2" (13mm) barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.

Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap.

Note: This item is the Growler Filler Spout and tubing only, it works ONLY with the Intertap line of taps.
Price: $9.49

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Intertap Growler Filler

Taps:
Intertap Stainless Steel Faucet

Handles:
Tap Handles

Average Customer Review: 3 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
 
Works But!! January 19, 2018
Reviewer: Brent Fraser from Saskatoon, SK Canada  
This is a good concept, but the hose size is too big for the barb and easily slips off. Not a big deal as I used a hose clamp to secure it. Not sure is a 3/8" hose would have been better

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Does the job January 15, 2018
Reviewer: Jean-Philippe Paradis from Matane, QC  
Get the job done. However, you need to install a SS hose clamp to stop it from leaking.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Why did this not come with a 3/8" hose? January 15, 2018
Reviewer: Jordan from Caledon Village, ON  
Save yourself some money and jam a 1/2" hose on your tap.  Voila, growler filler.

I bought this, disregarding the review seen here and thought I would just chance it.  "ASG" was right about this part.  I would give it a 4 star if it didnt come with a loose 1/2" hose for it and one that properly fit.  

This is just a Janky kit.

Was this review helpful to you?

  2 of 4 people found the following review helpful:
 
Not needed. Loose too much beer! June 2, 2016
Reviewer: ASG from Montréal, QC Canada  
I tried it but the hose is a little bit slack on the barb so air comes in and foam a lot. You end up loosing lots of beer trying to fill your bottle.

In fact, you can attach the 1/2" hose directly to the end of the regular Intertap nozzle. It fits better than on the barbed one. Also, 1/2" hose is a little big for filling. It tends to create more foam than smaler hoses do.

Was this review helpful to you?