> Draft Equipment >

Keg Master Series 4 Kegerator - Intertap Stainless Steel Dual Tower
Keg Master Series 4 Kegerator
Alternative Views:

Introducing the all new Keg Master Series 4 Kegerator Intertap Stainless Steel Dual Tower!

This kegerator unit is designed for those wanting to dispense two 5 gallon (19L) kegs while keeping a 5 lb (2.6 kg) Co2 tank inside the fridge. It comes equipped with the newest state of the art Stainless Steel Intertap Faucets as well as a new MK3 Regulator (Co2).

By default these Kegerators come with NSF approved Thick Wall Beer Line Bevlex 200 Tubing attached to each of the tower shanks. It is higher quality than the standard EVABarrier tubing and easier to work; especially if you desire to attach additional hardware or convert it to match the kegerator kits sold on our main site. Alternatively if you desire to use the EVABarrier tubing and hardware it is included as well.

Dispense two different beverages with this beautiful commercial quality Kegerator.

Kegerator Fridge Features:
  • New and improved Tower Fan (Font Fan)
  • New Circuit Boards with temperature control, calibration, and on-board memory functions
  • High quality Stainless Steel Intertap Faucets
  • Sturdy guard rail system
  • Increased compressor power while being approximately 20% more electrically efficient
  • Improved drip tray & rear cylinder bracket holder
  • Glass holder and wire shelf

Please Note:
  • Due to the customizable nature of this Kegerator assembly is required.
  • We will contact you regarding shipping.
Price: $649.99

Availability: Usually Ships in 24 Hours


Keg Master Series 4 Kegerator - Dual Intertap S.S Tower

  • Stainless Steel Intertap Faucets with Short Shanks x 2
  • Stainless Steel Beer Tower with Mounting Hardware
  • MK3 Regulator (CO2)
  • Font Fan (toggle on/off)
  • CO2 Cylinder Bracket Holder
  • Guard Rail
  • Drip Tray
  • Reinforced Four Point Anchored Castor Wheels
  • Stainless Steel Door
  • Black Reinforced Plastic Top
  • EVABarrier 4mm ID x 8mm OD Beer & Gas Hose
  • 6' of 3/16" ID Bevlex Beer Line per Faucet
  • Duotight push in tee (for gas splitting) x 1
  • Hose Clamps x 7
  • 5-in-1 Tap and Cylinder Tool x 1
  • Keg connections sold seperately

Exterior Dimensions:
  • Depth (with Co2 Holder): 31 1/4"
  • Depth (no Co2 Holder): 25"
  • Width: 24"
  • Height (no Wheels, Tower, or Rails): 32 1/2"
  • Height (with Tower): 47 3/4"

Shipping Dimensions:
  • Height: 36"
  • Width: 28"
  • Depth: 28"

Share your knowledge of this product with other customers...
Click here to write a review