> Draft Equipment >

Keg Charger
Keg Charger
 
Great for home brewers. Small compact and easy to use. Trigger controlled inflation. Built using high strength glass-reinforced nylon with brass valve internals. Uses threaded co2 cartridges NOT INCLUDED.
Price: $16.49

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Keg Charger

WARNING: Never attach the ball or pin lock valve to the charger first. It can cause the valve to be OVER-PRESSURIZED and fail. Always attach the ball or pin lock valve to the keg first, then attach the Cornelius CO2 Keg Charger to the disconnect valve. This product needs a MFL pin lock or ball lock disconnect to dispense home brew kegs. To dispense commercial kegs use a universal tailpiece on the gas side of your coupler.

Also Note: This product is meant be used with threaded cartridges. Non-threaded cartridges will still work, although a spacer may be needed to hold in place.

Average Customer Review: 3.5 of 5 Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
 
Not impressed October 11, 2017
Reviewer: Erik from Ottawa, On  
Found that it leaked quite a bit out of the box. Used Teflon on every connector I could access.

After a few charges, the nut that holds the threaded cylinder fell off the charger (and was impossible to put back into place due to the puncturing pin's position).

Spent over 45 minutes trying to get the square nut back into proper position through disassembling the upper portion of the mechanism (which, upon closer inspection, is very weak). During disassembly, I must have damaged a component since the piston won't shut off anymore.

Very disappointing: I unboxed it about an hour ago and it's already in the trash.

Very surprised OBK would carry something of such poor quality.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Sure. Fine. June 10, 2014
Reviewer: Bradley from Ottawa, On  
This thing will put enough gas in your keg to get you through a night. Even when it is fussy it works, you just go through more cartridges.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Comes in handy in a pinch May 7, 2014
Reviewer: Jonas from Calgary, AB Canada  
Works well, extremely portable. Also useful for when I have to drop off my large tank overnight to get filled.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great quick purging tool! October 23, 2013
Reviewer: Brent from Ontario  
For those splitting a batch between 2 kegs (eg. 2 x 3 gallon), I use this to quickly purge O2 out and minimal pressurization for the keg that will sit. Faster than setting up cylinder, gauges, etc. since mine is plumbed into the fridge.  I also use this for visits with my home brew friends.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great once figured out! August 4, 2013
Reviewer: Marc Rheaume from Pembroke, ON Canada  
I wasted my first cartridge fiddling with the fittings, but I've since learned to pay attention. Well, not really.
Either way, makes bringing a keg much more portable and impressive to friends. Protects your regulator in that it allows you to leave it at home, out of harm's way.

Was this review helpful to you?

View All Customer Reviews