> Brewing Equipment >

Mash King Stainless Steel Thermometer 6" Probe
Mash King Stainless Steel Thermometer
 
Alternative Views:


Brewing consistent beer largely depends on the accuracy of the wort temperature during the brewing process. Monitoring the temperature of the wort can easily be achieved by using a thermometer. Under high temperature, the wort can boil off too much which will eventually lead to the strong aroma and bitterness of the final brew. However, home brewers need to use the right brewing thermometer to monitor the temperature of the hot wort inside the kettle.

The Mash King thermometer is made from stainless steel which is resistant against rust and corrosion. This thermometer features a large three-inch face made from tempered glass thus it does not easily break even under high heat.

The thermometer is compatible with different brands and types of brew kettles and pots. It has a length of 6 5/8" with 6" of it is made up of the probe. It can be screwed directly into a 1/2" pipe thread opening. But if openings are not found in the kettle, drilling a 1/2" hole is necessary. This thermometer provides readings in both Celsius (0 to 100 C) and Fahrenheit (-10 to 220 F) for convenience.

To install this thermometer, make sure that it is placed in an area that is away from the direct heat from the burner as it can lead to a superfluous reading. It is important for the thermometer to get the average temperature reading of the wort.

Price: 23.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Mash King Stainless Steel Thermometer 6" Probe

  • Features a large three-inch tempered glass face.
  • Made from stainless steel.
  • Can be screwed into a 1/2" pipe thread opening on the kettle.
  • Works great with any brew pots and kettles.
  • Total length of the thermometer is 6 5/8".
  • Temperature reading is in both Fahrenheit (-10 to 220 F) and Celsius (0 to 100 C).
  • Adjustment screw located at the back.

Stainless steel 6" thermometer brewing

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
Great 6 inch probe SS Thermometer September 26, 2013
Reviewer: Guillaume Charbonneau from sainte Victoire de Sorel, QC Canada  
I love this big easy readable thermometer. It works like a charm on my new 15 gal HLT. I didnt play with the calibrating screw on the back side but it seems to be reading the exact temperature compared to other thermometers i have.
Thanks

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Good Thermometer August 5, 2013
Reviewer: Gabriel Smith from Guelph, ON Canada  
Bought this with a 9 gal. brew pot. Works well with a nice size face. Just wish the face could move independently of the fitting. Mine sits in the socket almost upside down. Came properly calibrated and seems to be holding well after 3 brews a month or so apart each. Something I wish I had though of before purchasing is that the probe sticks out far enough that it interferes with my chiller.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Great Thermometer for coolers! October 1, 2012
Reviewer: Dan from Bradford  
Purchased a pair of these for my cooler based Mash Tun and cooler based Hot Liquor Tank. The length is perfect after the weldless fittings I've used leaving ~2" protruding inside the cooler. It doesn't hurt that these retail for less than any other 1/2" NPT  thermometers I've seen on the market.

Was this review helpful to you?