> Draft Equipment > Carbonating >

Micro Matic 1-Way Primary 1-Gauge Co2 Regulator (60 PSI) [841]
Micromatic 1-Way Primary 1-Gauge CO2 Regulator (60PSI) [841]
Alternative Views:

High-quality Micromatic 1-Way Primary 1-Gauge CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary CO2 regulator has a brass body that comes equipped with a CGA320 inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges.

Approved for use with CO2, the bonnet is Red Painted Forged Aluminum.

It has a quad-ring inlet seal and a sintered bronze mesh inlet filter.

Primary regulators are designed to be hookup up directly to your CO2 tank, providing a way to reduce the high pressure when dispensing the gas.

The outlet is a 3/8" OD barbed gas shut-off valve (Right-hand thread).
Price: $78.49

Availability: Usually Ships in 24 Hours


Micromatic 1-Way Primary 1-Gauge CO2 Regulator (60PSI) [841]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.
  • Quad-ring inlet seal
  • Flow control inlet filter
  • Aluminum Bonnet
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-60 PSI low pressure gauge (Right Hand Thread)

  • 4 1/2" Wide
  • 7 3/4" Tall

Share your knowledge of this product with other customers...
Click here to write a review