> Draft Equipment > Carbonating >

Micro Matic 1-Way Primary High Pressure Co2 Regulator (160 PSI, 3000 PSI) [642HP] - Premium Series
Micromatic 1-Way Primary High Pressure CO2 Regulator (160PSI, 3000PSI) [642HP] - Premium Series
 
Alternative Views:


High quality Micromatic 1-Way Primary CO2 Regulator - Premium Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet.

The regulator has a "shut down" safety system (blow off at 115 to 125 PSI). Can be manually released using the integrated PRV. High quality and highly accurate gauges.

'High Pressure' regulators are equipped with a 0-160 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.

The valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2.

Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.

The outlet is a 3/8" OD barbed gas shut-off valve (Right hand thread)

Warning from Micro Matic:
Only use in a gas blender or nitrogen generator application!
Price: $119.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Micromatic 1-Way Primary High Pressure CO2 Regulator (160PSI, 3000PSI) [642HP] - Premium Series

Specifications:
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 115-125 PSIG. Can be manually released using the integrated PRV.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2
  • Nickel plated valve seat for higher corrosion resistance
  • Sintered bronze mesh inlet filter
  • Built in CO2 resistant solid nylon inlet seal
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 120 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-160 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)
Dimensions:
  • 7 1/2" Wide
  • 7 1/4" Tall
Warning from Micro Matic:
Only use in a gas blender or nitrogen generator application!

Share your knowledge of this product with other customers...
Click here to write a review