> Draft Equipment > Carbonating >

Micro Matic 1-Way Primary Low Pressure Co2 Regulator (15PSI, 3000 PSI) [842-15]
Micromatic 1-Way Primary Low Pressure CO2 Regulator (15PSI, 3000PSI) [842-15]
Alternative Views:

High quality Micromatic 1-Way Primary High Pressure CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary CO2 regulator has a brass body that comes equipped with a CGA320 inlet.

The regulator has a "shut down" safety system (blow off at 115 to 125 PSI). High quality and highly accurate gauges.

This 'Low Pressure' regulator is equipped with a 0-15 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.

The bonnet is made out of Red Painted Forged Aluminum. It is approved for use with CO2.

It has a quad-ring inlet seal, and a sintered bronze mesh inlet filter.

Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.

The outlet is a 3/8" OD barbed gas shut-off valve (Right hand thread).
Price: $144.99

Availability: Usually Ships in 24 Hours


Micromatic 1-Way Primary Low Pressure CO2 Regulator (15PSI, 3000PSI) [842-15]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.
  • Quad-ring inlet seal
  • Flow control inlet filter
  • Aluminum Bonnet
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 15 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-15 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)

  • 7" Wide
  • 7 1/2" Tall

Share your knowledge of this product with other customers...
Click here to write a review