> Draft Equipment > Carbonating >

Micro Matic 1-Way Primary Nitrogen Regulator (60 PSI, 3000 PSI) [842N]
Micro Matic Double Gauge Nitrogen Regulator (60PSI & 3000PSI) [842N]
Alternative Views:

These high quality, 1-Way, Primary Micromatic Nitrogen Regulators are NSF approved, PLUS they are approved for use by all major breweries. Manufactured in the USA.

This primary Nitrogen regulator has a brass body that comes equipped with a CGA580 inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges.

It has a quad-ring inlet seal, and a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen.

Primary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.

The outlet is a 3/8" OD barbed gas shut-off valve (Right hand thread)
Price: $99.49

Availability: Usually Ships in 24 Hours


Micro Matic Nitrogen Regulator - Double Gauge (60 PSI & 3000 PSI) [842N]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2 and Nitrogen.
  • Quad-ring inlet seal
  • Flow control inlet filter
  • CGA580 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-60 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)

  • 7 1/4" Wide
  • 7 1/2" Tall

Share your knowledge of this product with other customers...
Click here to write a review