> Draft Equipment > Carbonating >

Micro Matic 2-Way Dual Primary Co2 Regulator (60 PSI, 3000 PSI) [642-Battery] - Premium Series
Micromatic 2-Way Dual Primary CO2 Regulator (60PSI, 3000PSI) [642-Battery] - Premium Series
 
Alternative Views:


High quality Micromatic 2-Way Dual Primary CO2 Regulator - Premium Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). Can be manually released using the integrated PRV. High quality and highly accurate gauge.

The valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2.

Dual Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed. The dual nature of this regulator allows you to directly adjust the pressure for each of the two products.

The outlets are 3/8" OD barbed gas shut-off valves (Right hand thread).
Price: $209.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Micromatic 2-Way Dual Primary CO2 Regulator (60PSI, 3000PSI) [642-Battery] - Premium Series

Specifications:
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG. Can be manually released using the integrated PRV.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2
  • Nickel plated valve seat for higher corrosion resistance
  • Sintered bronze mesh inlet filter
  • Built in CO2 resistant solid nylon inlet seal
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valves (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-60 PSI low pressure gauges (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)
Dimensions:
  • 13 1/2" Wide
  • 7" Tall

Share your knowledge of this product with other customers...
Click here to write a review