> Draft Equipment > Carbonating >

Micro Matic 2-Way Secondary Co2 Regulator (60 PSI) [1162] - Premium Series
Micromatic 2-Way Secondary CO2 Regulator (60PSI) [1162] - Premium Series
 
Alternative Views:
High quality Micromatic 2-Way Secondary CO2 Regulator - Premium Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This secondary CO2 regulator has a chrome plated brass body that comes equipped with a 3/8" OD barbed inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges. All right hand (RH) threaded ports.

The valve seat is made out of nickel plated brass for higher corrosion resistance. It is approved for use with CO2.

Secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.

The outlets are 3/8" OD barbed gas shut-off valves (Right hand thread)
Price: $194.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Micromatic 2-Way Secondary CO2 Regulator (60PSI) [1162] - Premium Series

Specifications:
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2
  • Flow control inlet filter
  • Nickel plated valve seat for higher corrosion resistance
  • 3/8" OD barbed inlet (Right hand thread)
  • Body parts are 1/4" NPT (Right hand thread)
  • 3/8" OD barbed gas shut-off valves (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • Comes with wall mounting brackets
  • 0-60 PSI low pressure gauges (Right Hand Thread)
Dimensions:
  • 8" Wide
  • 7 3/8" Tall

Share your knowledge of this product with other customers...
Click here to write a review