> Draft Equipment > Carbonating >

Micromatic 1-Way Primary Nitrogen Regulator (60PSI, 3000PSI) [GN1773] - Premium Series
Micromatic 1-Way Primary Nitrogen Regulator (60PSI, 3000PSI) [GN1773] - Premium Series
 
Alternative Views:


High quality Micromatic 1-Way Primary Nitrogen Regulator - Premium Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). Can be manually released using the integrated PRV. High quality and highly accurate gauges.

The valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with Nitrogen.

Primary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.

The outlet is a 3/8" OD barbed gas shut-off valve (Right hand thread)
Price: $119.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Micromatic 1-Way Primary Nitrogen Regulator (60PSI, 3000PSI) [GN1773] - Premium Series

Features
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG. Can be manually released using the integrated PRV.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Nitrogen
  • Nickel plated valve seat for higher corrosion resistance
  • Sintered bronze mesh inlet filter
  • Built in CO2 and Nitrogen resistant solid nylon inlet seal
  • CGA580 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-60 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)
Dimensions:
  • 7 3/4" Wide
  • 7" Tall

Share your knowledge of this product with other customers...
Click here to write a review