> Draft Equipment > Carbonating > Regulators > Micromatic Regulators > Micromatic Secondary Regulators >

Micromatic 4-Way Secondary CO2 Regulator (60PSI) [8044]
Micromatic 4-Way Secondary CO2 Regulator (Alum. Bonnet, 60PSI) [8044]
 
Alternative Views:


High quality Micromatic 4-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This secondary CO2 regulator has a brass body that comes equipped with a 3/8" OD barbed inlet and pass-thru outlet. The pass-thru outlet can be replaced with a 1/4" NPT plug (included).

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges. All right hand (RH) threaded ports.

The bonnet is made out of Red Painted Forged Aluminum. It is approved for use with CO2.

Secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.

The outlets are 3/8" OD barbed gas shut-off valves (Right hand thread)
Price: $339.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Micromatic 4-Way Secondary CO2 Regulator (Alum. Bonnet, 60PSI) [8044]

Features
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2
  • Flow control inlet filter
  • Enlarged CO2 port for high volume
  • Aluminum Bonnet
  • 3/8" OD barbed inlet (Right hand thread)
  • Body parts are 1/4" NPT (Right hand thread)
  • 3/8" OD barbed gas shut-off valves (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • Comes with wall mounting brackets
  • 0-60 PSI low pressure gauges (Right Hand Thread)
Dimensions:
  • 12 1/2" Wide
  • 7 3/8" Tall

Share your knowledge of this product with other customers...
Click here to write a review