> Draft Equipment > Carbonating >

Micromatic 1-Way Primary CO2 Regulator (60PSI, 3000PSI) [842]
Micromatic 1-Way Primary CO2 Regulator (60PSI, 3000PSI) [842]
 
Alternative Views:


High quality Micromatic 1-Way Primary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary CO2 regulator has a brass body that comes equipped with a CGA320 inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges.

The bonnet is made out of Red Painted Forged Aluminum. It is approved for use with CO2.

It has a quad-ring inlet seal, and a sintered bronze mesh inlet filter.

Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.

The outlet is a 3/8" OD barbed gas shut-off valve (Right hand thread).
Price: $94.49

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Micromatic Double Gauge Primary CO2 Regulator (60 PSI, 3000 PSI) [842]

Features
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.
  • Quad-ring inlet seal
  • Flow control inlet filter
  • Aluminum Bonnet
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-60 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)
Dimensions:
  • 7" Wide
  • 7 1/2" Tall

Share your knowledge of this product with other customers...
Click here to write a review