> Brewing Equipment >

Perlick Stainless Steel Growler Filler - 630SS Faucets
Growler Filler For Perlick 630SS Faucets
This model is for Perlick 630 SS Faucets. This handy accessory allows you to fill growlers from the bottom which creates less foam. Stainless Steel and double o-ring seals provide a good tight seal to the inside of the faucet preventing messy leaks. This model only works on Perlick 630 SS faucets. Approximately 12" in length.
Price: $8.99

Availability: Usually Ships in 24 Hours


Growler Filler For Perlick 630 SS Faucets

  • 3/8" ID NSF Approved food grade hose tubing

  • Bottles will fill better chilled

  • Capping on foam will give best results for storage

  • Double gasket design

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
4 of 5 Seals with faucet well January 10, 2015
Reviewer: Justin A. from Guelph, ON  
Seals with the faucet perfectly. Make sure your faucet, bottles and growler filler are chilled, and CO2 pressure turned down to reduce foam on filling. Only complaint is that the growler filler displaces a lot of volume due to the thick tubing, so you will need to top up your bottles before totally removing it.

Was this review helpful to you?