> Brewing Equipment >

Pit Viper Stainless Steel Immersion Wort Chiller - 25' X 1/2" | Vinyl Tubing
Stainless Steel Immersion Wort Chiller | 25' x 1/2" with Vinyl Tubing
Alternative Views:

Made In Canada

A premium immersion chiller made with 25 feet of 1/2" OD, 304 stainless steel. This gorgeous unit is designed to chill five gallons of hot wort in as little as ten minutes, but is capable of cooling larger batches as well.

Whether you're brewing with extract or all-grain, bringing down the temperature of the wort quickly in order to pitch the yeast is an essential step in homebrewing. Lowering the temperature quickly reduces chances of contaminating your beer with wild yeasts and bacteria, and will reduce the levels of DMS (dimethyl sulfide) that can ruin a beer's aroma. A quick chilling of the wort will also improve clarity in the final product.

The Stainless Steel Wort Chillers are more durable and hygienic products compared to the copper variety due to being made of 1/2" 304 Stainless Steel. The resiliency that these wort chillers provide is unmatched, giving you both an incredibly strong and long lasting wort chiller. The hygienic properties of stainless steel outmatch traditional copper, in addition Stainless Steel is a far easier to clean metal. Compared to our copper wort chiller of the same type, this wort chiller provides 50% more surface area allowing you to chill more beer faster.

When using an immersion chiller there's no unnecessary transferring to different containers, and there's no need to dilute the wort with cold water. Just drop the immersion chiller in to the brew pot. The preferred method of sanitation is to make sure it is clean to the eye and submerge the coil portion of the chiller into the wort during the last 15 minutes of the boil, this will kill any wild yeasts or unsanitary pests that might be introduced. Once the brew pot is taken off the boil, you can begin cooling immediately by hooking up the line and turning on the water.
Price: $94.99

Availability: Usually Ships in 24 Hours


Pit Viper Stainless Steel Immersion Wort Chiller - 25' x 1/2" with Vinyl Tubing

Assembly is Required.
  • (1) 8' length of clear vinyl tubing (hose ships as one piece allowing you to cut to your desired length)
  • (3) strong Stainless Steel Hose Clamp (Large)
  • (1) 1/2" heavy duty female swivel garden hose fitting
  • (1) instructions

Chiller Specifications:
  • 10" coil outside diameter
  • 5" coil height
  • 19" inlet/outlet height
  • Tubing Thickness: 0.7mm
  • 304 Stainless Steel

Average Customer Review: Average Customer Review: 2 of 5 2 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
2 of 5 My first chiller October 2, 2018
Reviewer: Vincent Gagnon from Saint-Basile-Le-Grand, QC Canada  
Where to start. Canadian made,1/2" x 25' stainless with included hardware. Great package/price in my book.

Pros: Fits perfect in my 10G kettle, Easy to clean, Robust

Cons: Leaks where hoses meet stainless(No matter how hard i tighted clamps) had to replace hoses with Sillicone ones (Problem solved), Was not impressed with cooling time for 6G batches (Roughly 60 min with 72f water).

Therefore i am looking for a replacement since there is more cons than pros.

Was this review helpful to you?