> Brewing Equipment >

Pump Connection Kit (Camlock)
Pump Connection Kit with Camlocks
 
This kit makes it simple, and includes all the parts necessary (excluding the pump itself), to pump liquids from one vessel to another. If you already own a pump and want to make your brew day easier, this is the kit. The ball valve is a handy addition to have for throttling output. Connecting this system to your home brewery will allow for gravity draining and transferring to wherever you need it to go. Camlock connections makes it quick easy to connect and disconnect hoses as needed.

Vessel Connection Options: Two Camlock vessel connections are included with this kit. These options are dependent on the setup of your own system and whether the threading on your vessels are male, female, or one of each. Most common will be two "F" Camlocks as pumps are typically connected between female ball valves. Or often times "A" Camlocks are fitted to plate chiller input/output. But your system may be different. Map it out with your own parts before selecting.


Price: $86.99

Availability: Usually Ships in 24 Hours

Choose Vessel Connection 1 (Out)

"F" Camlock
"A" Camlock
Choose Vessel Connection 2 (In)

"F" Camlock
"A" Camlock

Quantity:  
Features
 

Pump Connection Kit (Camlock)

Parts Included
  • 4 "C" Camlocks
  • 10' of 1/2" ID Silicone Hose (2 x 5')
  • 1 "A" Camlock
  • 3 Piece Ball Valve
  • 1 "F" Camlock
  • (Choice of additional: 2 "F" Camlocks, 2 "A" Camlocks or 1 each "A" & "F" Camlocks)
*All Female Camlocks include Silicone Gaskets.

May we also suggest...
Teflon Tape Stainless Steel Weldless Whirlpool Arm Assembly (1/2" Flow)
Price: $1.49

Add
Price: $38.99

Add
Teflon Tape (aka Plumber's Tape) is used to wrap around your threaded brass or stainless steel connections. This will provide a tight seal and prevent leaking. Canada Supplies for Stainless Steel Hardware, Parts, Fittings and Connections Stainless Steel Weldless Whirlpool Arm (1/2" Flow)

Average Customer Review: 4.5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
 
Great value package ... but careful not a complete April 29, 2018
Reviewer: Simon Benoit from Montreal  
Great kit ... doesn't come with any hose clip, so IMO it's not a complete kit. Kinda disapointed when I was ready to assemble everything and I was missing like 8 hose clips

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great value package January 1, 2017
Reviewer: Jonathan Gibson from Victoria, BC Canada  
I bought this for my pump and it saved me alot of headache and money to get the pump hooked up and running.  The 10' of hose also leaves you some wiggle room if you make a mistake while running the lines too.  Great value for all the parts packaged together.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Easy way to switch to quality fittings October 23, 2016
Reviewer: Jarrod Connolly from Richmond, BC Canada  
I love this kit! It was so easy to switch my system over to camlocks once I bought the pump and this kit. Easy to install and use.

Nice additions would have been the High Flow Barb camlocks for the hose sides and maybe some basic hose clamps. Still a 5 star kit though!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
great value April 3, 2014
Reviewer: Bob CANNING from Wasaga Beach, ON Canada  
this is a great value for getting started with cam locks

Was this review helpful to you?